PDA

View Full Version : NA exhaust system


z3lda
23-10-2005, 11:37 AM
Say someone wants to have a full exhaust system for the little bit extra power, but doesnt want the noise that comes with gettin a full system.

Would geting header/catback and 2.5 piping into stock muffler be the same as 2.25 with 3 hot dogs and aftermarket muffler?

has anyone tried a 2.25 system with a stocker muffler?
wynode
23-10-2005, 01:58 PM
The main restricion is the piping diameter or not having a straight through muffler.
z3lda
23-10-2005, 02:15 PM
so stock muffler doesnt matter right aslong i the entire system is done corrextly. ?
wynode
23-10-2005, 02:45 PM
A chain is as big as the weakest link :)

So yeah.....no point having a full aftermarket exhaust if you still have a stock (restrictive) muffler
chinkdood
23-10-2005, 02:55 PM
mayb he wants to have a stock look..
keke sleeper effect. :P
z3lda
23-10-2005, 02:58 PM
what i want is full exhaust system without the loud noise, therefore hopin a stock muffer would reduce that.

but not sure how much restriction it would havve.
chinkdood
23-10-2005, 03:56 PM
y not try like an xforce twinloop..
thast pretty silent..
egads
23-10-2005, 04:40 PM
aftermarket with stock muffler, imo is like a 100 storey building, fire alarm goes off, and then everyone trying to get out of the one door. :)

perhaps a dc2r muffler?
ewendc2r
23-10-2005, 04:53 PM
Get a couple of hi flo resonators, and straight through muffler. I have mugen extractors, mugen exhaust inc. twin loop. It is subtle at anything below 4-5krpm. However you can still get her to scream if you throw it @ 9000 :P But if you want the ultimate for the street, dont skimp and just add another muffler if necessary.
Integra_Type[R]
23-10-2005, 05:23 PM
im currently running a JDM header and 2.5" custom exhaust with stock dc2r muffler.. result = dam quiet and the performance is still there..maybe lose alittle top end imo.
BiLL|z0r
23-10-2005, 07:13 PM
That sounds like the answer. Is the DC2R muffler fairly straight through and what size is the opening?
DynoDave
23-10-2005, 08:10 PM
Say someone wants to have a full exhaust system for the little bit extra power, but doesnt want the noise that comes with gettin a full system.

Would geting header/catback and 2.5 piping into stock muffler be the same as 2.25 with 3 hot dogs and aftermarket muffler?

has anyone tried a 2.25 system with a stocker muffler?
Use a DC2R muffler these are a very good one and offers very little restriction and I have tuned cars that make over 130kw thru these mufflers.Piping size is dependent on what engine you have use a straight thru resonater with the DC2R muffler and you will have a quiet exhaust that will make good power.
Regards Dyno Dave
zacz
23-10-2005, 08:28 PM
Use a DC2R muffler these are a very good one and offers very little restriction and I have tuned cars that make over 130kw thru these mufflers.Piping size is dependent on what engine you have use a straight thru resonater with the DC2R muffler and you will have a quiet exhaust that will make good power.
Regards Dyno Dave

Thats exactly what ive done on my VTIR Integra, and it sounds awesome! Nice power especially down liw - with just a touch more deep sound compared to standard!
sivic
24-10-2005, 08:26 PM
would an S2000 muffler be as good as a DC2R muffler?