PDA

View Full Version : Few questions



heist
09-11-2005, 08:20 AM
hoping you guys could help me out.

1. How long approx is the oil line from the back of the block to the turbo?
2. can i use fuel lines for the oil return line? or does it have to be braided?
3. where is a good place to tee off from the vacuum lines for the bov?
4. where can i get silicon charge pipe joiners from?


i know i have more questions but i cant think of them now, if i do ill edit this post.

thanks guys

LVNIT
09-11-2005, 08:33 AM
1. How long approx is the oil line from the back of the block to the turbo?
About 1200mm

2. can i use fuel lines for the oil return line? or does it have to be braided?
Use a braided hose, you dont want something flicking up and cutting the oil return line ;)

3. where is a good place to tee off from the vacuum lines for the bov?
You can use any of the vacuum lines from the intake manifold, try to find one thats a closed loop.

4. where can i get silicon charge pipe joiners from?
www.gcg.com.au (http://www.gcg.com.au) have a wide variety or try www.ebay.com.au (http://www.ebay.com.au)

heist
09-11-2005, 05:26 PM
ok another question,

can i bolt my turbo to the manifold with stainless steel bolts and spring washers? if not what should i use?