Anyone here swapped a A8/ZC into an ED3?

[SlobberGoat]

Just want to know whether mounts and linkages were needed?

[heist]

ask Mojo teh flashy monkey....he did it

[[[d a n n y]]]

mounts are the same for all D serise

linkage should be the same

[bennjamin]

]']mounts are the same for all D serise

linkage should be the same

Not true. Earlier D series engined cars use a front mount too ontop of the usual 5 others - so factor this in IF you are buying a newer ZC/d16a8 out of say a EG civic. Also will you use hydraulic or cable gearbox ? And dont forget too about changing a carb'd layout to EFI too - need efi fuel tank + wiring + ECU + other bits n pieces...

[[[d a n n y]]]

but still be using the same mounts from a ED serise

[bennjamin]

]']but still be using the same mounts from a ED serise

+ 1 front mount possibly :)

PM "mojotheflashymonkey" for more info - he recently purchased a d16a8 off me and isntalled it into a ED sedan of recent - should have an idea of what is needed.

[[[d a n n y]]]

well all ED/EF have the front gearbox mounting in place..
so unless were talking about calble----> hydro conversion

you'll still be using a TEG/ED running cable gearbox..

so in that case yes the mounts are not needed

[ECU-MAN]

I did an engine swap recently,

the ZC front engine mount had to be changed to fit this ZC into a 2nd gen CRX.