PDA

View Full Version : Final Checklist, What to do, LS Teggy



Flanderz
09-11-2005, 05:48 PM
OK guys, finally finished the head gasket change

The timing belt is on, head bolted up, everything has been drained and refilled, oil etc, water. Is there anything I need to do/Should do before trying to start the car??? Anything I should double check, look out for???

bennjamin
09-11-2005, 08:32 PM
relevant to tegs so moved :)

wkdteg
09-11-2005, 09:51 PM
all wiring connected?
everythin bolted on tight?
looks like uve got it spot on bro

michael_antoi
09-11-2005, 10:22 PM
check everything is grounded properly?

all hoses are connected securely?

other than that sounds good to go

SKREMN
09-11-2005, 10:23 PM
turn over the motor with a ratchet fisrt to make shure the cams are 100%
then start the car with disconnected dizzy to get oil flow happeing and no dramas happen
chrank untill the light goes out for oil

Flanderz
11-11-2005, 01:53 PM
ok cool, thanks for the replies, Have run into a few probs on the double check so Havn't had a chance to start, Timming was out so I have ripped off the belt again and will be doing with the help of a competent mechanic lol.

wkdteg
11-11-2005, 01:56 PM
yeah man... never attampt to adjust the timing unless ur 100% in wat ur doin. 1st time u try should always b with a pro guiding u