PDA

View Full Version : h22a conversion question


h22a jdm
13-11-2005, 02:56 PM
if you were to buy a h22a front cut conversion and put it into a crx do you weld the h22a front cut to the crx or do extend the crx engine bay and put it in thanks :honda:
Paul1985
13-11-2005, 03:12 PM
LOL
that would take some mighty fine engineering to do so, that would weaken the chassis incredibly IMO.

You take your old engine out of your engine bay and install the new h22a along with custom mounts that hold it in place.
Paul1985
13-11-2005, 03:14 PM
btw, this is not an easy task, not at all. You will also need plenty of other things to get the h22a up and running in your car and it will cost alot more than just the halfcut aswell, not a cheap job.
h22a jdm
13-11-2005, 03:15 PM
would a b18c fit in without custom mounts
Paul1985
13-11-2005, 03:33 PM
im not 100% but i think you can use either the integra/crx mounts. not sure which ones. Someone else will be able to confirm this im sure.

I do know that a b-series swap (b18c/b16a etc) is much easier and you require little or no custom parts as compared to the H-series swap. Its a much more appropriate option IMO. Check out the DIY B18C swap into an EG Civic by ECU-MAN, it is in the Articles/Reviews section i think. It is a fantastic write-up although its not in a crx it will still give you an insight as to what to expect.
Paul1985
13-11-2005, 03:36 PM
Here you go, i found it for you:
http://www.ozhonda.com/forum/showthread.php?t=30312

also check out this B16A FAQ by SiR JDM, very informative also:
http://www.ozhonda.com/forum/showthread.php?t=14136
ECU-MAN
13-11-2005, 04:28 PM
would a b18c fit in without custom mounts

yes bolt straight in ( gen 3 del sol )

No to an ED Gen 2, then you need custom mounts
h22a jdm
20-11-2005, 03:34 PM
would it fit easy on a gen2 crx with little custom mounts
crxzzR
20-11-2005, 04:14 PM
b18c in a gen 2 crx req. HAsport engine mounts .. roughly ~700-800 i think? don't hold me on that price..
h22a jdm
20-11-2005, 04:25 PM
wats ha mean
egads
20-11-2005, 08:26 PM
wats ha mean

by that are you referring to Hasport? they are an american company specialising in engine mount kits. http://www.hasport.com/
h22a jdm
24-11-2005, 04:23 PM
is their custom mounts for H_SERIES
amurray
24-11-2005, 04:29 PM
http://www.ozhonda.com/forum/showthread.php?t=13733 , that is putting a H22a into a EG civic, cant amagine it would be to much differant
barefootbonzai
24-11-2005, 04:31 PM
do some research bro, there is pleanty of information on engine swaps out there.