H22a TB in d16a8

[crxzzR]

would there be any noticeable diff.?
i've got a h22a intake manifold and was thinkin of usin the tb on my d16...
same size?? or h22a is bigger..?

or even still h22a intake manifold on d16a8...
possible or not?

[bennjamin]

both = afaik NO

the bolt pattern on both the TB and inlet manifold wont fit , not to mention difference in size + sensor location etc. (correct me if wrong plz!)

[crxzzR]

ok .. good.. .. i'm jus tryin to do as much as i can to my d16 for Very very little money..
thought if i had a h22a lying round it might be useful..
saving up for b18cr jdm...
thanks ben

[Weq]

the h22a TB will fit. what u talkin bout benny?

i assume u have a crx?

[michael_antoi]

i've heard the LS throttle bodies fit also and they are a little bit bigger than the d16 TB's

[crxzzR]

uh oh... who do i believe....
=P
d16 is 55mm is it??

[crxzzR]

Let's say if i use the h22a TB... in terms of the MAP Sensor and TPS... i just re-use the current ones am i right..??

[crxzzR]

bump...

[DynoDave]

Let's say if i use the h22a TB... in terms of the MAP Sensor and TPS... i just re-use the current ones am i right..??H22A TB only has the TPS sensor mounted on it the map sensor is mounted on the firewall so a B16A TB or the LS one will be your best choice just the early ones where 58mm and the later TB's are 60mm.If you want to swap a H22A one for a B16A just PM me I can help you out.
Regards Dyno Dave

[Mateoo]

speaking of intake manifold and TB's does anyone know the compatability of intake manifolds within B and D series

[egSi]

b16/18 will fit on d16a8.

[DynoDave]

b16/18 will fit on d16a8.
Your talking TB correct?
Regards Dyno Dave

[nedgeworth]

Your talking TB correct?
Regards Dyno Dave

Yes he is.