PAPZ
23-11-2005, 02:47 PM
Hey Guys,
Im after some valuable information reguarding these new brakes i bought recently.
I picked up a set of Spoon forged monoblock calipers for ap1 s2000/dc5 integra type r, 300mm SCR PRO rotors plus pads and lines. I want to fit these to be Civic (I didn't opt for the conventional spoon caliper for ek9). I have seen the monoblocks fitted to a DC2R, so I know it can be done.
im not concerned on the pads and lines atm but im having problems sourcing information fitting the calipers on to my car.
my stud pattern is 4x100 and the only way i can get the rotors on atm is sourcing someone to make me a custom hat to fit the two-piece rotors. then the dramas begin....
wat do i do next to fit the calipers? ive been told that the AP1 caliper bracket won't fit, and that I will need another bracket to fit it to the Civic. Also, would I need a spacer for the rotor? im still tryin to figure out the best possible way to get these fitted.
i appreciate any help!
:confused: :confused: :confused:
Im after some valuable information reguarding these new brakes i bought recently.
I picked up a set of Spoon forged monoblock calipers for ap1 s2000/dc5 integra type r, 300mm SCR PRO rotors plus pads and lines. I want to fit these to be Civic (I didn't opt for the conventional spoon caliper for ek9). I have seen the monoblocks fitted to a DC2R, so I know it can be done.
im not concerned on the pads and lines atm but im having problems sourcing information fitting the calipers on to my car.
my stud pattern is 4x100 and the only way i can get the rotors on atm is sourcing someone to make me a custom hat to fit the two-piece rotors. then the dramas begin....
wat do i do next to fit the calipers? ive been told that the AP1 caliper bracket won't fit, and that I will need another bracket to fit it to the Civic. Also, would I need a spacer for the rotor? im still tryin to figure out the best possible way to get these fitted.
i appreciate any help!
:confused: :confused: :confused: