View Full Version : kings superlows too low?????
DOCH16
23-11-2005, 11:37 PM
i got a 92 delsol with 15" EM1 rims i wanna drop it on king spring superlows is it too low has anyone done it before??
iamhappy46
24-11-2005, 01:28 AM
Hey,
In my experience, dumping a car on super lows causes to many problems, especially with Mr Plod.
I find Whiteline are good for answering questions like this one... and can recomment a comfortable ride height
www.whiteline.com.au or 1800 040 003
Plenty of other places out there.
DLO01
24-11-2005, 07:52 AM
Depens on what your opinion of 'too low' is. Will it be a daily driver too?
I personally thing that super lows are too low as a functionality thing especially if its a daily driver. I have lows in my Del Sol, its a nice height and I really can just about go anywhere, speed bumps, gutters etc with a bit of care. If its just a weekend car, then I would consider the super lows.
I think Zelda had his really low once, hopefully he can comment.
Have fun. :thumbsup:
i have super lows on my eg with koni yellows on lowest setting. im tuckin tyre front and back on my 15s.
go for it man, i drive mine daily, looks **** :thumbsup:
bumography
24-11-2005, 06:55 PM
oh yea
kingsuperlows on gen3 CRX is low as~ my friend tried to get his camber fixed, but they said they couldnt because it was too low (needed camber kit probably), his car is stock too (as in no kit, stock wheels).
However, king superlows on a gen2 CRX is piss high...
DOCH16
25-11-2005, 07:55 AM
yeh i want it to look good, atm it looks like a tractor
its for daily driving but i dont mind slowing the f**k down for speed humps, etc
i dont go over speed bumps, i get 'bogged'
got like 4 finger gap from front lip to ground and like 3fingers from bottom of resonator to ground.
2 low to 2 tow y0! :D
HwyStar
25-11-2005, 09:57 PM
Can you some of these for an ED9?
And if so, whats the RRP for them?
[stealth]
25-11-2005, 10:22 PM
superlows = not as low as u think.... should be fine..
friends got superlows i think on his del sol with stockies.. nice height..
if you have lips/skirts forget about it
superlows is not that low.
the back would be on the guard and bit under, front maybe a finger or so.
z3lda
26-11-2005, 03:47 PM
I think Zelda had his really low once, hopefully he can comment.
:wave:
king springs super lows are that low.
this is 14" stock honda rims on spuer lows
http://img.photobucket.com/albums/v312/z3lda/DSC02036.jpg
this is 15" stock honda rims on super lows"
http://img.photobucket.com/albums/v312/z3lda/DSC02049.jpg
havent tried 16" but these are 17"
http://img.photobucket.com/albums/v312/z3lda/DSC01603.jpg
http://img.photobucket.com/albums/v312/z3lda/DSC01861.jpg
so far i've gotten rid of the superslows as they are not low enough for my application. i've got something else and it lowers the car way more then super lows
VTi_b0i
26-11-2005, 04:26 PM
what did u get that "lowers the car way more then super lows"??
yourfather
26-11-2005, 06:39 PM
airbags?
z3lda
26-11-2005, 11:46 PM
coilovers will lower the car more then kings
VTi_b0i
27-11-2005, 12:03 PM
yehh but im talking bout springs lol i cant afford coil overs just yet...does anyone know how much roughly it would cost to put airbags in an EH civic?
bungsai
27-11-2005, 12:16 PM
i think its pretty safe to say if u cant afford coilovers atm, then you cant afford airbags.
VTi_b0i
27-11-2005, 12:19 PM
i think its pretty safe to say if u cant afford coilovers atm, then you cant afford airbags.
lol i know that...i just want to know how much it would cost. if its too high then ill just save for coilovers...i would really like to slam my car on bags tho..
z3lda
27-11-2005, 01:33 PM
or u can get coilover sleeves for about 230$AU.
they will lower your car aswell
hwo does it go with 17" on super low??? hard to drive?
DOCH16
27-11-2005, 09:17 PM
hwo does it go with 17" on super low??? hard to drive?
yeh i want to know the same!
i put the sol on superlows anyway the other day its not that low i find that the rear looks higher than the front, but i probally have to wait till they wear in abit i'll post some before and after pics when i figure out how to.
DOCH16
27-11-2005, 10:00 PM
ahhh, fustrated, how the F**K do u post pics
can someone give me a run down or point me in the right
direction
bungsai
27-11-2005, 11:32 PM
or make an account at photobucket.com, or wait till u become a member here on OH
DOCH16
28-11-2005, 10:45 AM
http://i27.photobucket.com/albums/c193/DOCH16/PIC_0017.jpg
this is before the lowering
http://i27.photobucket.com/albums/c193/DOCH16/553005.jpg
advertising pic that when it was for sale
http://i27.photobucket.com/albums/c193/DOCH16/Vic36.jpg
and this is after lowering on the preludeaus. fotoshoot day
http://i27.photobucket.com/albums/c193/DOCH16/Vic35.jpg
more...
http://i27.photobucket.com/albums/c193/DOCH16/Vic33.jpg
last one
iamhappy46
28-11-2005, 09:03 PM
I think Superpro sell the adapter for normal shocks, to convert them into height adjustable
www.superpro.com.au and do a search for Honda Civic parts
z3lda
29-11-2005, 04:54 PM
u should lower it more buddy
STTICH
29-11-2005, 04:56 PM
looks great wif the coupe wheels.
yea..should lower it more ! :)
DOCH16
29-11-2005, 09:46 PM
give it time to sag there brand new springs, u gotta wait 1 or 2 months to wear them in
z3lda
29-11-2005, 09:54 PM
2weeks to sag
DOCH16
29-11-2005, 11:01 PM
i was told a couple of months by dandy tyre factory
TYPE-ONE
29-11-2005, 11:08 PM
DOCH16. Do You think you can fit 16's with those springs on?
DOCH16
29-11-2005, 11:32 PM
yeh if 17s are no problem for z3lda then 16s should be fine
see the pics of his car
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.