torque settings for flywheel

[krasyvy]

has anyone got the torque settings for the 6 bolts on the outside of the flywheel (not the 6 bolts on the inner circle)

this pic shows the torque settings for the 6bolts on the inner circle but i need to know the torque settings for the outer circle

thanks guys

http://www.ozhonda.com/gallery/watermark.php?file=500/2719flywheel-med.JPG

[bennjamin]

the "outer" cirlce ? You mean the smaller bolts that hold the pressure plate onto the flywheel ?
According to my general D series manual here each bolt (8 i think)should be 26NM each.
Undo + retighten in the usual cross-diagonal method...

[krasyvy]

26NM ok thanks for that mate.

[ECU-MAN]

do them up in 3 stages as well,