EG/DC2 shocks fit on an EK???

[civiceg9]

as topic
will EG/DC2 shocks fit on an EK???

[Limbo]

fronts will but back ones won't as they have a slightly different trailing arm.

You can make them fit if you buy the rear trailing arms

[barefootbonzai]

as limbo said, but you can't get rear trailing arms to fit either. so in short only front will fit.

[bennjamin]

as limbo said, but you can't get rear trailing arms to fit either. so in short only front will fit.

Do you guys mean the lower control arm ? Because the EK rear LCA is slighty narrower ( and thus the rear fork is slightly narrower) ~

To get EG/DC shocks to fit the rear , all you need is a afew spacer washers to fit inbetween the rear fork.

[|N|]

all you need is a afew spacer washers to fit inbetween the rear fork.

that doesnt sound very nice to me la ben

[barefootbonzai]

whoops my mistake.

[fried]

as stated above, rear shocks will not directly/safely fit on. (koni uses different part numbers for the rear dampers between dc/eg and ek, so i would assume they are different).

as for as i understand it, it IS the rea LCA which is different which causes them to need different forks.