fitting ITR sway bar end links to ek civic?

[BlitZ]

I have read that u cant fit ITR sway bar end links to ek civic control arm.. if so why not?

They both look to be flat mounted...

OR can i?

[bennjamin]

same principle to fit but the dimensions of both cars are different at the subframe and endlinks methinks. Why not just fit something made for your EK ? Like a heavy duty 24mm whiteline unit ?
You can trial fit and tell us all tho !

[BlitZ]

same principle to fit but the dimensions of both cars are different at the subframe and endlinks methinks. Why not just fit something made for your EK ? Like a heavy duty 24mm whiteline unit ?
You can trial fit and tell us all tho !

what are the dimesion differences? bolt holes? the length?
I know the ITR ones hasnt got rose joints.. but look to look..

[ekslut]

Ben is right in that the subframe dimensions are different. I measured them myself once, and the EK one is a lot longer than the EG/DC/ED ones.

But it should fit as http://a-spec-racing.com/ sells the ITR rear swaybar in its EK kits. I can't see why not the ITR endlinks won't fit....

[BlitZ]

Ben is right in that the subframe dimensions are different. I measured them myself once, and the EK one is a lot longer than the EG/DC/ED ones.

But it should fit as http://a-spec-racing.com/ sells the ITR rear swaybar in its EK kits. I can't see why not the ITR endlinks won't fit....

Yeah i know about the subframe part... The subframe mounts on the teg bar is about 1 cm closer on each side then the civic bars..

but y does all the kits ... even the ASR kit come with civic end links and not ITR end links ?

thanks in advance