How to remove door interior

[pinga]

Hey, how do I take the door interior off?

My door lock is playing up and I want to open it up to check it out.

Thanks in advance :D

[Zdster]

What model/car is it for?

On an ek - remove the screw that is in the armrest pocket as well as the screw that you will see behind the inner door handle. Slide off the speaker cover, and remove the three (?) screws near the speaker (not the speaker screws however). Then it is simply of starting in one place and slowly and gently pulling the panel off (there are a number - around five - clips that hold it on).

[mj3610]

on a eg remove the screw near the mirrior, take the window visors off, remove screw from door handle trim and basically take off all the screws there and just pull it off its easy, putting it bak on is the hard part ;)

[incoming]

when u unscrew everything that mj3610 mentioned.. theres alot of clips holding the bottom edge i place.. give it a lil force and pull them out... dont be shy about it either... haha

when u put it back on
make sure the door lock sliding arm is clipped into place too
otherwise it'll vibrate when u drive

[pinga]

thank you guys. I will go do that now :)

edit:

Opps. So there are 2 screws I need to remove? One near the hinge and one in the door handle?

Then, do I pull it out towards me with pressure pulling UP or DOWN ??

How expensive are those clips to replace if I break it? :P *scared* :(