PDA

View Full Version : height of super lows


EGBOY
15-12-2005, 10:22 AM
just wondering if anyone has a set of superlows that they can measure for me.. want a measurement of total height when unsprung or sitting out of car etc! thanks..
ekslut
15-12-2005, 10:50 AM
try calling or e-mailing king springs. They should have your answer.
mrwillz
15-12-2005, 11:11 AM
im finkn of gettn superlows 2

ive been told its a drop of 2in
mayb not nuff for me civ.... =/
DOCH16
15-12-2005, 11:37 AM
yeh i got superlows on my delsol they droped it about 50mm
looks awsome, but i think underneath is illegal
this is before springs
http://i27.photobucket.com/albums/c193/DOCH16/553005.jpg

and this is after
http://i27.photobucket.com/albums/c193/DOCH16/Vic34.jpg
DLO01
15-12-2005, 12:23 PM
yeh i got superlows on my delsol they droped it about 50mm
looks awsome, but i think underneath is illegal
Are you sure they are Super Lows? I have Kings LOWS on mine and my car looks just as low as yours. Look at the gap in the wheel arches.
It will depend on what brand you use, each brand of spring will have their varying height. :thumbsup:
http://i13.photobucket.com/albums/a265/DLO01/Misc/7.jpg
ekslut
15-12-2005, 12:28 PM
guys I don't think he wants to know how much the car will drop by, but what the actual height of the spring is.
DLO01
15-12-2005, 12:30 PM
guys I don't think he wants to know how much the car will drop by, but what the actual height of the spring is.
Your right. :thumbsup:
EGBOY
15-12-2005, 01:58 PM
thanks EKslut,

your on the money... not interested in what the drop is, im interested in the measurement of the actual spring top to bottom when unsprung.
Domokun SPL
15-12-2005, 10:54 PM
Just a question, why do you want to know the unsprung height? Calculate the springrate or...?
EGBOY
16-12-2005, 07:16 AM
i want to get the height as i want to get a custom set of springs made that that are firmer in springrate and also to sit the car a little bit lower than superlows...
ek4-guy
16-12-2005, 03:22 PM
just drive into whiteline tell them what rating you want an where you want it to sit they will then custom make you springs the other way might be hard cause if you get a harder spring an its a little shorter it would problly sit the same height as a super low due to compressing less Whiteline automotive is at 4 Lincoin st Minto NSW
Domokun SPL
18-12-2005, 01:43 PM
Ditto with the guy above, whiteline make custom springs to desire. Plus you know you are dealing with a very very reputable company.