One halo blown...

[Rico]

Anyone else who has angel eye projector lights in their car, where one of the halos has blown? Mine just blew last night, it was flicking for like 2 weeks and finally turned off. I heard its not possible to fix them? I was thinking of taking off the cover then checking the LED in the bracket but I'm unsure if thats possible. Help!!

[fabz]

bump. i wana no ansa 2 this

[2MPRSS]

yep mine is blown,both of them in 3 months they are shiit i hate em and wiish i can turn bak time and not buy them.and no u cant fix them no warranty or nufing on the halos

[heist]

i read i diy somewhere on how to fix them, its just the leds that blow...take them apart and replace the leds

[_FeRiO_]

Yeah they so S***. Mine blew only several months later aswell. u can fix it, but not worth it. Da LED's are only like 5 bucks each or sumfin, but i got a quote of $200 because they have open it and then re-glue it and sunfin about it being air tight i fink.

I don't have any halos left, i disconnected the parker.

[BlueSiR]

as heist and FeRiO said, u have to use heat gun to open da housing then repalce da LED. but not just tat, otherwise ur halo gonna blown just like da old ones ...da tricky part is u also have to connect a resistor to da end of ur wire. then seal da housing with silicone.
this r da parts u will need:
8- 5mm 3.7 volt 20Ma 2600mcd LEDS (in anycolor u want, but might not be legal)
4- 220-Ohm 1/4 watt 5% resistors

[EGB16A]

as heist and FeRiO said, u have to use heat gun to open da housing then repalce da LED. but not just tat, otherwise ur halo gonna blown just like da old ones ...da tricky part is u also have to connect a resistor to da end of ur wire. then seal da housing with silicone.
this r da parts u will need:
8- 5mm 3.7 volt 20Ma 2600mcd LEDS (in anycolor u want, but might not be legal)
4- 220-Ohm 1/4 watt 5% resistors

have you done this before? where did you get that list of parts?