View Full Version : my fan dont work :(
heist
30-12-2005, 04:19 PM
hey guys.
my car overheats sometimes, i figured its the fan not coming on....
so, i know the fan works cos i tested it.
now should the fan come on for a sec at startup? if so i know the thermoswith is good...
the relays i think are fine cos i swapped them...
anyone with any ideas?
Q_ball
30-12-2005, 04:20 PM
blown fuse la....check the fuse box
EG5[KRT]
30-12-2005, 04:24 PM
put a multi meter on the switch and c if there is any difference in resistance when u put the switch in ice or in ur hand ...
heist
30-12-2005, 04:40 PM
blown fuse la....check the fuse box
whoops, forgot to mention the fuses are all good,....
ctr kid
30-12-2005, 04:42 PM
relay???
heist
30-12-2005, 04:49 PM
done that ctrkid...
ctr kid
30-12-2005, 06:17 PM
stick a paper clip in the plug of ur fan sensor, to bridge it out (u will find it on the thermostat housing) unplug it and bridge it out. ! ur fan should start. if it doesnt might b the sensor!
heist
30-12-2005, 06:58 PM
hey ctr kid, i just tried that, and the fan came on.....so its my thermoswitch.... ill have to get a new one.
thanks ctr kid!
sorry heist, i had 1 i just sent to WA cause another guy had the same problem :)
ECU-MAN
30-12-2005, 11:44 PM
its your thermo fan switch
when testing these, they do not vary resistance, they are a on - off type of sensor.
you have to boil it in water and test for continuity.
geo41e
30-12-2005, 11:50 PM
yup
my bet is with ECU MAN
what car ? and year model ?
this also helps
i had the same problem, ended up being the thermoswitch situated at the thermostat. You can bypass this by puting A wire in the plug of the female points, this will make the fan work again only thing is its continuously on when car is on. hope this make sense :o
ctr kid
01-01-2006, 01:23 AM
no probs bro ... rate me so i can b a member in the new year!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.