View Full Version : L.P. turbo with cams
shmivic
03-01-2006, 07:17 PM
how would a b series motor perform with a low psi turbo kit and also running decent cams?
i would think "great" due to high lift long duration cam profile but it may not be the case.
anyone who has any PROVEN knowledge post here
ECU-MAN
03-01-2006, 08:03 PM
all depends on the turbo
BLKCRX
03-01-2006, 08:21 PM
Simple solution to a simple problem
Build the best NA engine you can.
Then add 1psi of boost will it be better than NA ?
Answer = YES
Ok now add 30psi of boost, assuming everything is strong enough you will have one wild setup.
Build for NA then add boost !!
Sure there’s things to consider like valve overlap, but in general comparing raw data, turbo’ing the best NA setup will always result in great power.
Regards James
pornstar
04-01-2006, 12:46 AM
Shmivic, seeing ur signature has Toda parts, if ur in sydney, contact Adrian at Toda racing, or if ur in melbourne contact myself.
shmivic
07-01-2006, 02:15 PM
sorry but im in W.A
thanks for answers people
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.