PDA

View Full Version : Teg Blades Rims



Limbo
06-01-2006, 01:02 AM
Hi i got a set of stock Blades Intergra stock rims 4x100 @ 15".

Now can someone tell me what the width is? cos it says 15x6JJ.
I'm assuming this means 15x6 wide?
Also waht's the fattest tyre i can put on it? 195/55/15 or can i get 205/55/15?

TRU32U
06-01-2006, 06:31 PM
205 is do able
old mans rims are 15X6JJ and they wear 205s something 15 bridgesones.

dc-r
07-01-2006, 07:40 AM
generally 195/55/15
but as TRU32U says you can use the 205s no probs

ginganggooly
07-01-2006, 10:10 AM
yep, 205/50/15 will fit the rim with no dramas.

I did have a problem with the 205's rubbing on the splash guards during hard cornering. It will also throw your speedo out a tad as they're smaller in circumference

edit-> just realised you were asking about 205/55/15's... they will fit the rim, but they'll be too tall for the car, if it's lowered it will probably scrub.

doriemon
07-01-2006, 01:45 PM
it will depends on the tyre, some may be able to fit 225 as well, but just check the spec of the tyre u wanted

Limbo
08-01-2006, 11:10 AM
cool thanks guys