PDA

View Full Version : 205/55/16 on a dc2r?


jooboo
07-01-2006, 08:45 PM
would these fit properly??
wenshuju
07-01-2006, 11:27 PM
seems a bit too wide, maybe a little bit of scrapage.
BiGANG
08-01-2006, 12:50 AM
nah man will fit easy. I had 215's on my integra and didnt scrub. 205 will fit no problems
gambate
08-01-2006, 02:15 AM
it is not too wide, but might be too big (diameter)
barefootbonzai
08-01-2006, 02:18 AM
diameter shouldn't change, cause the 55 is only a percentage.
kOncept
08-01-2006, 02:57 AM
I don't think it's the width he's worried about it's the height of the side wall and I do believe the 'overall' diameter will increase slightly over standard? I may be wrong...
r`Geno
08-01-2006, 03:25 AM
would these fit properly??

NO!!!

205/55/16 will definately rub.

Don't go over 45 offset for the dc2r
|N|
08-01-2006, 05:54 AM
ur speedo is not goin to be showing the correct speed
tinkerbell
08-01-2006, 09:45 AM
mine rubbed on the rear with 205/50R16

i am running 45's now, and it is perfect.
OZ#227
08-01-2006, 08:49 PM
Same as Tinks...
I run 205/45/16's with Spoon Progresive springs (lower) & I have never had any rubbing issues. I reacon DC2R's were made for 16's....Just feels (JDM) right.

With the OEM size being 195/50/15's...The 16's should be ???/45/16's. To keep close to the same rolling Dia. Keeps speedo more accurate.
But 195, 205 shouldn't make much difference.