PDA

View Full Version : leaking coolant - connecting pipe


krasyvy
07-01-2006, 11:51 PM
http://www.ozhonda.com/gallery/watermark.php?file=500/2719pipe.jpg

there's an extra little pipe (where i drew in grey) on my connecting pipe which is leaking fluid.

i dont know what hose is spose to go there.

the other little pipe (directly left of the grey line drawn in) is connected to the IACV so thats fine, but there's another little pipe that's leaking coolant..


what am i spose to connect that to?
krasyvy
08-01-2006, 12:04 AM
http://i16.ebayimg.com/02/i/05/df/e7/20_1.JPG

u can just see it here

where the coolant pipe meets the right side of the water pump, the little pipe is point downwards
ECU-MAN
08-01-2006, 12:30 AM
plug it up

it will be ok,
krasyvy
08-01-2006, 12:38 AM
oh....

what is normally spose to stop that from leaking?
krasyvy
08-01-2006, 10:42 AM
bump

this is where the coolant is leaking from

but i dont know if a hose is spose to go there....

hmmmmm...?

anyone?

http://www.ozhonda.com/gallery/watermark.php?file=500/2719IMG_1754.jpg
iamhappy46
08-01-2006, 01:54 PM
Hey man,
My motor has that hole completely block off. Looks like it was cast with metal inside it.
Block it off.
ECU-MAN
08-01-2006, 10:01 PM
your saying its leakign from that hole right ???
Weq
08-01-2006, 10:24 PM
i think its the return for the IACV water? i could be wrong. i dunno if mine has that pipe
Slow96GSR
09-01-2006, 04:28 AM
That is actually the stopper for that whole assembly. There should never be a hole in it. It was put there to stop that pipe from jamming into the water pump. It's not leaking out of there. It has to be the seal that goes between that pipe and the water pump assembly. I used some grey Loctite and the o=ring to help it not leak. The seal kit should be like $5 USD so ya I'd just pop out that pipe and redo the seal.