No Brakes Ahhh 94 Accord

[vtecinaccord]

Hi there i have a 94 Accord Vti without ABS. Lately when i have been braking my pedal is slowly sinking to the floor the hard i push it until it bottoms right and and the car does not slow down as normal.
Is that the brake master cylinder that has died or what.. Help needed quickly

Thanx..

[accordoholic]

Had that same problem before on my CB7 Accord and 99% sure that with your case is the brake master cylinder.

You will need to use your hand brake if it's necessary and suggest you get that fixed ASAP.

[ECU-MAN]

you need to rebuild or replace you Brake Master Cylinder

[Spoon-Accord]

yeh,, master cylinder mikey!!

i had the same problem back then..

at the lights. hot day.. touch the brakes at lights.. just sinks all the way.

doesnt matter shouldnt cost u more than 250 to replce..

i paid like.. 120 for a new cylinder(aftermarket) non genuine honda :D

[vtecinaccord]

OK cool so i have found a new HONDA Master cylinder on ebay i only need the this piece is that correct?

http://www.mypage.tsn.cc/things/1111734928469_brake_master_honda_accord[1].jpg

[Spoon-Accord]

thats it my man!!

[accordoholic]

well, before you go and buy it, you might wanna check if it can be reconditioned. If it can, it could save you some money and it works just as good.

[stephen8512]

check up on the brake pads too while ur at it

[vtecinaccord]

Oh one more thing boys. Can anyone tell me the part number i just want check i am recieving the correct part for Aussie cars.. Thanks.

[stephen8512]

not sure if this would be any help but i think the 94 cords are known as acura CL's in the states so you might wanna try this forum

http://cl.acurazine.com/

hope this helps

[h22a accord]

same thing is happening to mine lately on hot days....it's not a good feeling.

can anyone else confirm that it's a master cylinder problem and does anyone know if the 94 non abs master cylinder is interchangeable with 96 prelude non abs cylinder as i have one spare.