PDA

View Full Version : TD-04 turbo from WRX ??


yourfather
31-01-2006, 01:37 AM
Hey guys, im a bit of a n00b, but is a TD04 turbo from a WRX going to be any good for my VTi-R DC2...

Looking at running about 6-9 lbs of boost on stock internals

Saxman if ur out there, any advice.

http://firesport.ipspace.com/?section=item&action=show&id=41352
saxman
31-01-2006, 08:12 AM
it's an awfully small turbo with irc some odd flange designs. If you want a smaller turbo, I'd go with soemthing like a t25 instead
LowEk
31-01-2006, 08:45 AM
have a look on ebay.com.au man there are some good cheap turbo's on there.
jimmeh
31-01-2006, 08:45 AM
i wouldnt bother. yes it would prolly work but after a month or so your gonna want more power.
Slow96GSR
31-01-2006, 09:54 AM
It's a good turbo for low boost but once you build up that motor it's not going to be enough.
jimmeh
31-01-2006, 11:03 AM
It's a good turbo for low boost but once you build up that motor it's not going to be enough.
:thumbsup::thumbsup::thumbsup::thumbsup:
an your always gonna want more HP
yourfather
31-01-2006, 11:51 AM
ok, I shall keeeeeeeep looking.
jimmeh
31-01-2006, 02:08 PM
ok, I shall keeeeeeeep looking.
are u in the market for a turbo. you should be able to pick up a BB unit for 500
yourfather
01-02-2006, 01:43 AM
yeah I am .

Ball bearing is good yah?
STOCK
01-02-2006, 12:49 PM
Exhaust housing is too small and will result in too much heat in a car that revs to 8k