accord clutch master

[Spoon-Accord]

hey guys..

working on the car atm.. went and bought a new clutch master cause my old one did fail..

before ripping out the old one. worked fine. just hot day pedal creeped to floor. and hard gear changing

after putting in the new one. there is no pedal feel. meaning no air being pushed thru

i removed the pipe from the actual cylinder and pumped. fluid came rushing out

when i put all the pipes back on and remove it from the slave cylinder. barely no air escapes..

wat could this be guys?

kenny

[ECU-MAN]

you have ot bleed the clutch just like you bleed the brakes dude,

pedal down, open the nipple, close nipple then pedal up, repeat several times till all air is out of the system :)

[Spoon-Accord]

ahh all down..

used the gravity bleeding method also open all way pump pump and done!

swett as now..

thankz buddy appreciate ur help!