need to kno wat type of ecu i have

[dc4t]

doess anyone know wat type of ecu i would have? i got a 97 integra gsi, so its b18b2. i was under the impression that i hav a p75 0BDII ecu? not that i kno anything really about ecu's. oh well someone help!!

[barefootbonzai]

just have a look on the side of your ecu. you should see it on the sticker in little writing. But yeah you should be OBD2a

[BLKCRX]

The ECU you have if its a Australian ECU is a 37820 p75 Q02 - 9860199675 HG
its a obd2a ECU, with the Board type being a M1Y-C L5000-01 it contains no 5151 IC's and is a none vtec ECU... i have one in front of me now ;) its Application is useless for anything other than stock purposes.

Regards James

[dc4t]

oh i had a look and im sure i read p75 but its night time and i was reading upside down so mayb i read wrong but i checked 3 times :S.. ill hav a look again tomoro

[ProECU]

The ECU you have if its a Australian ECU is a 37820 p75 Q02 - 9860199675 HG
its a obd2a ECU, with the Board type being a M1Y-C L5000-01 it contains no 5151 IC's and is a none vtec ECU... i have one in front of me now ;) its Application is useless for anything other than stock purposes.

Regards James

Not entirely true.

[dc4t]

i was thinkin of buying one of those "spoon" chips off ebay lol i guess theyre replica or fake?? i've been reading comments from ppl who've bought them and all of them were pleased with it. any comments on that?

[BLKCRX]

As far as I’m aware there are zero "chip" upgrades commercially available for this ECU
sure you could get the surface mount OKI 341 Processor reprogram it up, and replace the MPU but this is not a feasible option, like I said, and I still stand by what I said, this ECU is only good for stock use. Nobody actively develops this technology.

[dc4t]

oh ok now im confused. that says it would fit on a p75 ecu?? :confused:

http://cgi.ebay.com/ebaymotors/SPOON-RACING-Acura-Chip-94-95-Integra-p74-p75-ecu_W0QQcmdZViewItemQQcategoryZ33597QQitemZ8022410 049QQrdZ1#ebayphotohosting

[BLKCRX]

The P75 ECU there talking about a 94 to 95 ECU, yours is a 97 very very different.
its like comparing gold to dog poo. Im sorry that product will not work.

Regards james

[dc4t]

ahh damn... thanks for that man i woulda bought some wrong crap

[dc4t]

hmm ive got a new question. if i was to upgrade to a crower 403 cam setup. how would i go about upgrading my ecu?

[BLKCRX]

You need a full replacement computer, I of course only recommend Hondata for Honda’s ;)

Where in Australia are you.

Regards James

[ProECU]

As far as I’m aware there are zero "chip" upgrades commercially available for this ECU
sure you could get the surface mount OKI 341 Processor reprogram it up, and replace the MPU but this is not a feasible option, like I said, and I still stand by what I said, this ECU is only good for stock use. Nobody actively develops this technology.

Just because Hon$a$a dont develop it, doesnt mean others dont.
Do a search for Didier(France), or RPT(Malaysia) you might be suprised.

People need to understand there are other solutions available than the typical Harness + OBD1 conversion if they're willing to go to the time & effort to research and learn a thing or two.

What I wanted to say before OzH crashed on me is that if you search for Didier(France) or RPT(Malaysia) you will be pleasantly suprised.

Things are about to change domestically, watch this space.

[barefootbonzai]

I'm watching and waiting. I'll be more than happy to give your product, come on hurry up and release it :)