My DIY intake thermo

[czy_sol87]

hey guys i was bord so i thought this would be a cool cheap mod. cost me about $20, and i bought the thermo from Jaycar
i have installed a digital thermo to let me know how hot the air is goin in my intake.

this is what it looked like in the box
http://i29.photobucket.com/albums/c276/czy_sol87/thermoinpakage.jpg

firstly u have to find a place to put it in the cabin
http://i29.photobucket.com/albums/c276/czy_sol87/digitalthermometer.jpg

and another
http://i29.photobucket.com/albums/c276/czy_sol87/dashwiththermo.jpg

next thing u have to do is run the wire that tells the temperature outside though the fire wall and into the intake.
http://i29.photobucket.com/albums/c276/czy_sol87/holeinfirewall.jpg

i ran my wire into the cluster so there wasn't wire haggin out everywhere this was probally the hardest part taking out the cluster.

i forgot to take pics while i was doin this and its a pain to take apart again so ill just walk though what to do on the delsols

firstly undo these 2 screws
http://i29.photobucket.com/albums/c276/czy_sol87/howtotaketheclusterout2.jpg

for the two button things on the top of either side of the cluster u just simply pull them out there is not screws for these then unplug them

[czy_sol87]

mod please delete thread
thanks

[JasonGilholme]

why you wanna delete it???

[czy_sol87]

this was the mistake thread i went half way then accidentally hit the submit button
theres another that is finished off completely