Muffler pics for ED & EF?

[Jord]

ok guys i have just resently purchased myself a 3.5" cannon muffler and i want it on an angle simular to this: pic attached
i am also interest to see wat yours are like for example straight angled etc....
i was just wondering if anyone else has done this to an ED or EF?

pics of ur muffler back on like this would be great cheers

-Jord

http://img138.imageshack.us/img138/8107/angledcannononhb4pq.th.jpg (http://img138.imageshack.us/my.php?image=angledcannononhb4pq.jpg)

[iamhappy46]

Fitting it at THAT angle is actually really hard and would basically require a lot of bends and restrict gas flow...

Fitting the canon at a 45 degree angle would be much simpler and give better gas flow, with a straight line from the R/H rear lower control arm to the canon...

[ekslut]

Here is how I have done mine. Rear pic is not too good to see it, but the other one should be.
http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=2367

http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=2366

The way that one in the pic curves around looks really restrictive. Only thing about doing it the way mine is done is that it is closer to the fuel tank. But I have wrapped mine in thermal wrap to protect it. Also it is closer to the ground. But with some decent suspension it shouldn't scrape.

If you want prices start a thread in the WTB section.

[Jord]

yea i understand that it would minimise air flow but im not really worried id rathe rhave it on that angle looking good.
i really only plan on having it like this for a temp. thing until i buy a full sports exhaust with extractors.

any other pics?

-Jord

[MoonSha]

I've got a stock layout, muffler is way to damn small though. Comparible in size to a hotdog but slightly wider and a little longer. I think there is a pic in my VBGarage, I might go and get a better one once the suns up.

[mini_s2000]

http://i16.photobucket.com/albums/b33/fabianc/ef9coolback.jpg

[Jord]

is that the ed that was for sale on carsales.com
b16 conversion?

anyone else with a cannon?

[Jord]

anyone with muffler pics cannon goes on thursday and i wouldnt mind a pic to take in to show the dude doing it :)

[crx88rb]

im getting mine staightened and putting it out the drivers side of the car

http://img132.imageshack.us/img132/5316/picture175tr0.th.jpg (http://img132.imageshack.us/my.php?image=picture175tr0.jpg)

[Jord]

why u getting it put to the other side and straightened?

[crx88rb]

i got a rear bumper fitted and it doesnt sit as it is and by having it come out the drivers side it is less pipe running from one side of the car to another it will also be a easy exit for the exhaust fumes, straight no bends