PDA

View Full Version : crower 403s


dohctor
11-02-2006, 04:11 AM
Howsit guys!!

Im from South Africa and have a B18b engine in my ballade. I was wondering what are your guys thoughts on these cams for my car?

Shot.
KB
11-02-2006, 12:43 PM
B18B responds very well to cams!

With I/H/E Stage 3 cams and ECU you will be eating B16a's
dohctor
11-02-2006, 10:26 PM
Hi KB thanx for the response.

I currently have I/H/E and just bought the crower 403s with cam gears as well as an ecu so i was also told to get the head skeemed(milled) to up the comp.

Is this true or what?
locote
11-02-2006, 10:33 PM
403s will work great on stock 9.2:1 comp!!!
even better on a higher com but dont require it.
go to
www.nonvtec.com and do a sear there lots of info and examples of crower powered N/A b18bs
locote
11-02-2006, 10:35 PM
the right combo with ur cams will net u over 150fwhp with a good tune.
surpasing a b18c in power and torque
dohctor
11-02-2006, 10:36 PM
Thanx locote will def. check it out!!

Shot.
dohctor
11-02-2006, 10:41 PM
Ok. What is 150fwhp in kw?

When you say combo you mean I/H/E and ecu right!
dohctor
11-02-2006, 10:43 PM
Is 150fwhp about 110kw? Cos then i will be happy. :D
locote
12-02-2006, 12:34 AM
intake= SRI and KnN pod, short runner intake manifold.
Header= good 4-2-1 header
Exhaust= 2.25 or 2.5 with good tunning= good top end power
tuning= a good ECU and a exelent tuner.
try and raise comp aswell.
youll have a good setup.
some of these american blokes are doing mid 13s with N/A B18Bs
dohctor
12-02-2006, 12:41 AM
Yeah those american blokes get the parts dirt cheap!! Here in South africa you pay through your ass for things!!