PDA

View Full Version : B nuts!, got a quick question


j-specAccord
21-02-2006, 04:44 PM
does a B18CR from a 96 model integra R use an OBD1 ECU or OBD2?
j-specAccord
22-02-2006, 06:20 PM
anyone know?
EG5[KRT]
22-02-2006, 06:26 PM
im pretty sure its obd2

but then again i mayb wrong .. supposively thye had to change over to obd2 due to emission laws afta 1994 so should b obd2 if its a 96 model
j-specAccord
22-02-2006, 06:37 PM
i c, i always assumed any model after 96 was OBD2
T-onedc2
22-02-2006, 06:41 PM
i c, i always assumed any model after 96 was OBD2
I would tend to think OBD2 as all AUDM 96+ were OBD2.
saxman
22-02-2006, 06:48 PM
honda started switching to obd2 in the late 1995 model year, so the any 96+ car is going to be obd2, along with a small handful of the 95 cars
j-specAccord
22-02-2006, 06:55 PM
thanks for the info.
i needed it for the swap im doing to my friends civic and we werent sure whether we'd need a conversion harness, now i know we will. so cheers
ECU-MAN
22-02-2006, 10:40 PM
Obdii
Slow96GSR
23-02-2006, 02:11 AM
honda started switching to obd2 in the late 1995 model year, so the any 96+ car is going to be obd2, along with a small handful of the 95 cars

I've seen some completely stock 96 acuras with OBDI. 97 is when they were 100% OBDII.
dc-r
23-02-2006, 06:53 AM
does a B18CR from a 96 model integra R use an OBD1 ECU or OBD2?

when you say 96 ITR, is that JDM or AUDM ?
if you have JDM engine, then i belive you have use JDM ECU.
it is different between JDM and AUDM ECU. :o
j-specAccord
23-02-2006, 03:46 PM
the engine is JDM, i needed to know what OBD it was so i know if i need to change the harness or not, not use a AUDM ECU...
dc-r
24-02-2006, 07:25 AM
what i am trying say is, it is OBD 2 but jdm and audm OBD2 has little different wire diagam. far as i know. because, the experience from my friends case. he's engine is JDM 96 model as well, he coulden't use audm OBD2. so he used jdm obd2 instaed...
i am pretty much sure you need to use jdm ecu.

cheers...
VT3C
24-02-2006, 04:11 PM
honda started switching to obd2 in the late 1995 model year, so the any 96+ car is going to be obd2, along with a small handful of the 95 cars

that's dead right - MY1996 (Model Year) starts with cars made since september 1995.

so yeah anything that's a MY96 on is OBD2..

not sure when OBD2a / OBD2b (OBD3?) etc came out though.