EG3 and EG6 Chassis

[hayashi_1986]

Are they both the same? Could I fit suspension and strut bars (front and rear) from an EG6 on to the EG3 chassis?

Any help would be cool! :D

Cheerz! :wave:

[egads]

strut bars = yes
suspension = only fronts. rears will require eg6/dc2r lower control arms ($200something new)

[[[d a n n y]]]

All Eg chassis are the same.
though EG3 is different to EG6 in the specs and running gear /engine,box,sussy,brakes
same strut bars can be used on the EG3/EG6 or even DC2
but suspensions differemt/

EG3 is same as EG5/EG4 etc

[hayashi_1986]

thanks fellaz, thats all i needed to know really :D so its possible to fit dc2r sussy on an eg...cool. Figured I needed control arms for a set of new suspension as well.

how does the an eg handle with dc2r suspension?? and how much to do the job?

[VT3C]

actually your EG3 may not have pre-tapped holes for the braces like EG4 and EG5.. pus your EG3 rear LCA's wont be able to take a sway bar either..

[[[d a n n y]]]

actually your EG3 may not have pre-tapped holes for the braces like EG4 and EG5.. pus your EG3 rear LCA's wont be able to take a sway bar either..

EG3 does have tappet holes

[Paul1985]

if you wanna put any dc2r coilovers on your car, you need either EG6 or DC2R Rear LCA's (Lower Control Arms) to bolt them upto. I paid $155 for a brand new set with bushings. I wouldnt bother getting stock DC2R suspension (sway bars, strut bars etc are fine), just save up for some better coilovers IMO.. some teins, hks, cusco etc.

Tein SS are very popular and a cheaper coilover option.. they should set you back between $1-2k

Just my opinions.

[hayashi_1986]

Thanks guys! You've all been a great help :D The handling on this car is priority at the moment, so i'm just trying to source as much info on the situation as i can before i commit into buying something that won't fit :rolleyes:

Anyway, thanks for all your help!
Its been much needed and appreciated!

Cheerz!