View Full Version : Engine Mount Inserts
BlitZ
03-03-2006, 03:07 PM
Anyone running them>?
does your interior rattle like a Dog of steriods?:thumbsup:
and if not what brand have you got
Ive heard prothane is alot harder than energy suspension one..
Else has anyone done the DIY urathane glue method? and is it removable?
And how is shifting.. is it smoother since there is less movement in the engine/gbox.
thanks in advance ,
daniel
SKREMN
03-03-2006, 06:05 PM
my shifting is more direct and stiff
also i got a stiffer ride in general
BlitZ
04-03-2006, 09:52 AM
my shifting is more direct and stiff
also i got a stiffer ride in general
is that because of the shifter/connecting rod bushings? or the engine mount..
Ive already got the shifter rod stuff.. didnt really help too much
maxtron
04-03-2006, 10:04 AM
It rattle like there is no tomorrow
maybe its me
but the shifting improve, i dont have the shifter rod
since it rattle too much i only install the front ones, feels better
ive got a set opf prothanes. Its true what they say, they make steeering and shifting 'more direct'. ALso improves wheel hop and engine moving around related problems. A byproduct is rattling though. THey rattle like a mofo for a bit then once they where in they get a lil better :) ES are supposed to be alot softer on the ears.
SKREMN
04-03-2006, 04:04 PM
is that because of the shifter/connecting rod bushings? or the engine mount..
Ive already got the shifter rod stuff.. didnt really help too much
I noticed most differance witht he shifter rods bushings and mounts
minimal with the engine mount inserts
spetz
06-03-2006, 01:47 PM
For those who have the engine mounts fitted, did it improve traction noticably?
BlitZ
06-03-2006, 01:58 PM
which mounts did everyone change? from what i can see there is 3...
on the the engine side one on the gbox side and one at the back? is that correct. it seems there is an upper front and others..?
I am planning to do the window weld method, but am afriad that ti isnt reversable
spetz
06-03-2006, 02:02 PM
From what I found out before, honda's use 5 engine mounts
There are 2 side ones apparently? Bottom and top
BlitZ
26-03-2006, 10:12 AM
has nayone tried window weld? or a similiar product..
I cannot find window weld fs anywhere@!
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.