animal EG!!!

[j-specAccord]

well i have finished my friends engine swap, it took two weekends to do as we had to wait on parts etc. me and my friend swapped in a B18CR (j-spec) into our good friends EG sedan and let me tell you now, this thing is an animal!
we purchased the engine last week from our local importer for 5500$ with mugen extractors, which to anyone is very cheap as the headers alone are 1500$. my accord pulls a 14.4 and this lil sedan left me for dead. we are expecting very high 13's - very low 14's out of this lil beast.
will post some pics soon and let you know on its 1/4 mile progress...


PICS PICS PICS NOW ON PAGE 3!!!

[Menzy]

yay :D hehehe ... keep it up

[jdm16]

Sweet. Brisbane is getting very fast B's and K's nowadays.

Turbo DC5 220+fwKW, B20 EK NA monster, EG with a K20, EK coupe with a K20, plus an EK drag race car soon to be released. Tough competition for B16s!

[cdpfxz]

tell me bout it! b16's in brisbane used to be the fast hondas... now they got nothing!

will be good to see the progress of this one, let us know how it goes, 13's would be nice!

nic

[Kenshin3180]

I have seen this thing first hand... Damn it is quick!!! Well done man :thumbsup:

[Menzy]

post it up :p ... hehehe

i wanna see i wanna see

[newmski]

ahh gives me inspiration.....so when i get my b18c5 u'll help me put it in my sedan also? :D

[j-specAccord]

yeah man ill help ya out, if you serious bout it just let me know, ill do it for 450$. i got a set of type R brakes outta the last swap so yeah just pm me or something.

also anyone who seen the red EG can back me up when i say that for a home job it aint dodgy, i havent missed a thing on it and it shows by how hard it pulls... oh wait one thing happened, the gear shift linkage came looses the first nite lol

[JDM_type_R]

thanks alot guys, without all ur help none of this wouldve happened... u all know who u are and it was awesome that we got it done so quick.... jspecaccord is the man!

[newmski]

pics!

[jdmlvn]

hey, are u also using the jdm ecu?

[j-specAccord]

yeah all original JDM goods... the only australian stuff in it is one civic mount and the radiator hoses.

[JDM_type_R]

will post pics up soon.... just need to get a bit of free time

[VT3C]

This B18C must have cams or something if your accord runs 14.4 and the EG chopped you.. hrmm.. good price for swap !!

[andreqo]

without cams shoudl be able to pull low 14's or high 13's wif gud driving skills
well done!!

[VT3C]

in a sedan ?? hrm.. weight is your enemy on the Quater mile.. I know hatches with lots of work done are struggling to get into the low 14's and high 13's over here..

[Civic Type R]

Thats correct !
Running a 13 isnt as easy as you think ;)

[andreqo]

hmm..true true...wight mite be a prob...well..i still seeing a possibility there ;) let's see the timeslip soon :)

[VTi_b0i]

sedans arent that much heavier then hatches... everyone thinks they are tanks lol...well i raced a VTi hatch and beat it... with same mods, cept i have extractors...

[Phamburger]

Awesome conversion mate!!!

Congratz. Now i was wondering did u have any addition mods when u did the conversion? eg header, Exhaust, CAI??? anything like that or was it all stock standard?

[z3lda]

too bad its in a sedan.

[VTi_b0i]

STOP BAGGIN SEDANS lol
dw JDM_type_R Silence the doubters/haters by smokin em' :)

[LAGOOT]

nice.. time for some pics eh ;)

[dc4t]

too bad its in a sedan.

wat u'd rather see that engine in another girly bubble hatch?? :confused:

and u guys talkin about weight j-specaccord's car has a stock jdm h22 and hes pullin that time..

[VTi_b0i]

LOLLLLLL Respekt Sedanz Yo! haha

[egads]

sounds like a beast mate! sleeper for sure.

howd the install go? you said two weekends because waiting on parts, was it basically straight forward swap? any hiccups along the way? im concerned about wiring, obd1 > obd2.

[j-specAccord]

hell yeah sedans represent! world record grocery getting!

umm the aftermarket mods are as follows; Mugen 4-1 headers, K&N pod. the headers have been wired to the stock civic cat and pipe just so we could drive it last nite.
it kept 'nose to passengers door' with a DC5 type-R with cams and ECU and the K20 EJ was a carlength ahead. i know breaking 13's in an N/A is not that easy but it is possible, my good friend can drive and drive well... we will aim for low 14's if its any quicker than that its a bonus on our behalf.

[j-specAccord]

sounds like a beast mate! sleeper for sure.

howd the install go? you said two weekends because waiting on parts, was it basically straight forward swap? any hiccups along the way? im concerned about wiring, obd1 > obd2.


we had a back to front (OBDii-OBDi) harness and barefootbanzai copied it as he knows his wiring shit.. big up to barefoot!
other than that, a very straight forward swap.. the only modifying we did was change the stock civic radiator to a bigger accord radiator, which only needed braket relocating

[JDM_type_R]

i wanted to go sedan rather than hatch cos i guess hatch has been done alot and wanted to do something a bit different... but it comes down to personal preference,, it would go hard out in either

[j-specAccord]

i ordered the OBD1-OBD2a harness and it came today so if any1 wants it for their type R swap PM me or jspecaccord


yep we got the harness today, so anyone interested in this harness pls PM. selling it for 200$ as we paid 220$ for it to be shipped so you getting it for 20$ cheaper plus you dun have t wait for it to be shipped overseas either...


aight finally got some pics up!

dont have any before shots so you just gotta imagine a stock looking EG sedan been transformed into this! (i also got my car into the pics)

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00309.jpg

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00312.jpg

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00311.jpg

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00313.jpg

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00318.jpg

[ATSEK4]

hell yeah sedans represent! world record grocery getting!

umm the aftermarket mods are as follows; Mugen 4-1 headers, K&N pod. the headers have been wired to the stock civic cat and pipe just so we could drive it last nite.
it kept 'nose to passengers door' with a DC5 type-R with cams and ECU and the K20 EJ was a carlength ahead. i know breaking 13's in an N/A is not that easy but it is possible, my good friend can drive and drive well... we will aim for low 14's if its any quicker than that its a bonus on our behalf.

THis EG is real quick! it should hit 13 :)

[egads]

we had a back to front (OBDii-OBDi) harness and barefootbanzai copied it as he knows his wiring shit.. big up to barefoot!
other than that, a very straight forward swap.. the only modifying we did was change the stock civic radiator to a bigger accord radiator, which only needed braket relocating

nice nice. would the ITR radiator fit?

[JDM_type_R]

didnt get a ITR radiator with it.. but yea it would fit if u got 1... had to modify the radiator and AC mounts a bit but it was pretty simple

[ATSEK4]

THis EG is real quick! it should hit 13 :)

Can't wait to see when it has a proper cat back yo !

[JDM_type_R]

yea man should go a lil harder and getting CAI soon.. should help it along

[JDM.Power]

ufff real sleeper, when will it hit the 1/4mile or track?

[JDM_type_R]

hopefully when i get the CAI and cat back goin.. but if barefoot would fckn finnish dinner n fix a small wiring issue i coiuld take it to track asap

[Phamburger]

Have u got any idea on which aftermarket exhaust system ur getting yet? How big the piping going to be 2.3 or 2.5? Custom exhaust or u going JDM brand, like spoon or mugen etc?

[Chris_F]

nice work... yet another fast sleeper honda in qld :thumbsup:

[JDM_type_R]

not really sure wat brand as yet.. havent done my research as yet.. but most likely 2 1/4 or 2 1/2 but umm any suggestions would be hectic

[ATSEK4]

go 2.5 yo

[Kenshin3180]

2.5 for sure

[JDM_type_R]

hey kenshin ur car is awesome bro... wat sorta CAI and exhaust setup u got?

[egads]

im not sure about 2.5, i mean if it was k20 then for sure 2.5, but i mean ITR exhaust is 2.25, almost flawless

[egSi]

shit yeah awesome guys! DIY swaps r **** :thumbsup:

well done i take my hat off to on BOTH!






*bennjamin edit Keep the free plugs out la :*

[dc4t]

its soo great to see my intake pipe and pod filter gettin put to such good use :'( :D

[Snoop_gee]

its red so its got 2 be fast ;)

[fatboyz39]

sounds like a beast mate! sleeper for sure.

howd the install go? you said two weekends because waiting on parts, was it basically straight forward swap? any hiccups along the way? im concerned about wiring, obd1 > obd2.

u can eaily order the conversion harness from america.. i picked mine up for $50, which was a real bargain! hehehe (try ebay)

or u can wire it up urself if u know wat ur doing, save urself some money;)

[Kenshin3180]

hey kenshin ur car is awesome bro... wat sorta CAI and exhaust setup u got?

I have a custom 2.5 exhaust from Rob Bliss exhaust with DC Sport Headers and AEM CAI. The headers aint the best, I would like to upgrade to Toda headers, but the car sounds great. :thumbsup:

[joyride]

what radiator did you use and did u modify the mounts for it?

[JDM_type_R]

we used an accord radiator and just moved the mounts accordingly.. it was very simple

[j-specAccord]

shit yeah awesome guys! DIY swaps r **** :thumbsup:

well done i take my hat off to on BOTH!






*bennjamin edit Keep the free plugs out la :*


cheers man!

[Paul_Dc5]

hell yeah sedans represent! world record grocery getting!

umm the aftermarket mods are as follows; Mugen 4-1 headers, K&N pod. the headers have been wired to the stock civic cat and pipe just so we could drive it last nite.
it kept 'nose to passengers door' with a DC5 type-R with cams and ECU and the K20 EJ was a carlength ahead. i know breaking 13's in an N/A is not that easy but it is possible, my good friend can drive and drive well... we will aim for low 14's if its any quicker than that its a bonus on our behalf.

lolol man b4 u say things like that about the car u should know what in the car, that car doesn t have cams mate, only ecu air-int and exhust.,.... :p

i dont fink your car is 14.4 coz the dc5r beat you few cars lenght and his dose 14.4 cuz that jspec dude rkns he can get 14.4 and the EG chops him.. however eg was side with wilson, willy can get 14.5

[G AE82]

lolol man b4 u say things like that about the car u should know what in the car, that car doesn t have cams mate, only ecu air-int and exhust.,.... :p

i dont fink your car is 14.4 coz the dc5r beat you few cars lenght and his dose 14.4 cuz that jspec dude rkns he can get 14.4 and the EG chops him.. however eg was side with wilson, willy can get 14.5

J Spec has run a 14.4 at willowbank. I saw the run.
I reckon we should all get out to track and trully test out these cars. I'm going tonight with my B16a AH.

[MR-VTEC]

sounds like there are alot of quick hondas coming out of the works lately. someone should organise a willowbank meet :)

[SLOWEGG]

lolol man b4 u say things like that about the car u should know what in the car, that car doesn t have cams mate, only ecu air-int and exhust.,.... :p

i dont fink your car is 14.4 coz the dc5r beat you few cars lenght and his dose 14.4 cuz that jspec dude rkns he can get 14.4 and the EG chops him.. however eg was side with wilson, willy can get 14.5

2mprss ran 14.4 if im not mistaken with just a b18c from a vtir. Althought his car is a hatch but hatches isnt so heavier than the sedan?
But some people have been been running high 13s or very low 14s in an eg with just a type r transplant.

[JDM_type_R]

well i cant really say its gonna run better than 14.4.. but rolling start that black dc5R with I/H/E should beat jspec accord but jspec can launch his car really good so thats prolli why he can get a very similar time.. there are heaps of factors so there isnt much point estimating shit until we actually take it to willowbank..
BTW jspec has the timeslips to prove his shit so no bullshit here

[JDM_type_R]

slowegg is right and plus my car is stripped out so the weight difference isnt goin to be huge.... the sedan isnt that much heavier car than a hatch

[j-specAccord]

Paul DC5, yo man on that night i was not dropping very good and my car is sluggish in 2nd gear as my ECU is throwing out 5 codes i need to check... b4 you judge me and my car, look at my stats and read my timeslip, i pulled a 14.4 twice when we went to the track and alot of ppl can back me up on it so dont hate. i said it wasted me cos it did on the nite.. i had a passenger, he didnt. i was comparing its speed against the cars it competed against... it was neck-neck with a familia running 14psi and kept a K20 EJ's tail which to me is quite impressive... what were you in?

[j-specAccord]

also man you should read the post. i did the swap so i know exactly whats in it! i aint trynna make enemies and i never lie bout shit like this as this is exactly what pisses me off bout the scene... so many bullshitters

[2MPRSS]

nice sedan,looks hektik full sleepa...

[JDM_type_R]

thanks bro!

[barefootbonzai]

You ****s are pov, ahhahahah

[honda_b_blastn]

Paul DC5, yo man on that night i was not dropping very good and my car is sluggish in 2nd gear as my ECU is throwing out 5 codes i need to check... b4 you judge me and my car, look at my stats and read my timeslip, i pulled a 14.4 twice when we went to the track and alot of ppl can back me up on it so dont hate. i said it wasted me cos it did on the nite.. i had a passenger, he didnt. i was comparing its speed against the cars it competed against... it was neck-neck with a familia running 14psi and kept a K20 EJ's tail which to me is quite impressive... what were you in?

Yes it was a quick little car,mad props:thumbsup: keeping the K's tail...i didnt see a point in proceding as soon as we got a jump...hehehe 6 gears baby!!! im sure all the boys would love a another un-expected meet up again! was an unreal night..

Also mad props to BAO.good to see that H22 sedan out and running mate..goes damn well!:thumbsup:

[JDM_type_R]

POV all the way baby LOL

[Paul_Dc5]

Paul DC5, yo man on that night i was not dropping very good and my car is sluggish in 2nd gear as my ECU is throwing out 5 codes i need to check... b4 you judge me and my car, look at my stats and read my timeslip, i pulled a 14.4 twice when we went to the track and alot of ppl can back me up on it so dont hate. i said it wasted me cos it did on the nite.. i had a passenger, he didnt. i was comparing its speed against the cars it competed against... it was neck-neck with a familia running 14psi and kept a K20 EJ's tail which to me is quite impressive... what were you in?


im the one in the dc5 turbo mate.
im not talkin about the times, it that u said that the black dc5 had cams, n all it has is air-int,exhus and ecu
should know what the other car have b4 u goin around say that u keeped up with a dc5 with cams n all that .........

[SLOWEGG]

im the one in the dc5 turbo mate.
im not talkin about the times, it that u said that the black dc5 had cams, n all it has is air-int,exhus and ecu
should know what the other car have b4 u goin around say that u keeped up with a dc5 with cams n all that .........

Im not trying to cause trouble or anything but in you last post you were comparing times..

[j-specAccord]

im the one in the dc5 turbo mate.
im not talkin about the times, it that u said that the black dc5 had cams, n all it has is air-int,exhus and ecu
should know what the other car have b4 u goin around say that u keeped up with a dc5 with cams n all that .........

fair enough, point made...
i was told by a few ppl it had those mods done (there proves my point, BS'ers) and like a sucker i believed them.. that explains why i kept the black one at bay lol. i was thinkin f*ck off i could keep a DC5R wit cams...

[egSi]

fast bris hondas :thumbsup:

i like how ur not 'testing' on the street LOL :D

[dc4t]

oh such haters on ozhonda.. noone believed j-specaccords time wen he got it.. and im sure as hell noones gona believe jdm type r's time wen he goes to the track

[JDM_type_R]

hey honda_b_blastn.. have u raced ur h22a hybrid against the k20 yet? if so howd u go???

[j-specAccord]

i'd say the K20 would get him... that thing pulls hard, STRIP THE INTERIOR!!!

p.s hurry up and get your car outta the exhaust shop already!!

[honda_b_blastn]

built h22a EG on boost.."cough cough"..coming soon..

This will be jdm-theory.com's next project..:honda: :thumbsup:

[EG5[KRT]]

wow damn fast hondas

where do u guys get all ur money ?? .. damn im sooo poooor ...

[NeRV]

Kenshins car sounds like a freakin ferrari... awesome car :thumbsup:

[SLOWEGG]

']wow damn fast hondas

where do u guys get all ur money ?? .. damn im sooo poooor ...

Drugs.. lol jks. OR got really lucky with lotto/casino!

[Malenic1981]

That civic is cool, sleeper with lyon heart.

Brisbane honda people are so lucky, here in Perth there isn't many hondas that do 14s not to talk about 13s.

[j-specAccord]

yeah man, brisbane is rising from the old days of B16's... man even i cant believe how many hard hondas we have here.
i feel sorry for perth, all the way over the other side of the world may as well be

[Malenic1981]

I hope we will rise our game a bit, at the moment there is lots of b swaps around and few people are boosting their bs, I think in next year or two we will have a big rise

[sivic]

main thing holding us back is the fact that we have few ecu tuning options for our hondas (within a reasonable budget) , therefore kinda limits the extent of mods that can be done and hence tuned without breaking the bank.
plus its still very turbo oriented here lol so plenty of nissans

[jooboo]

fk yeh mad eg...i wanna run low 14s...dont think its gonna happen in my GSi :p

[panda[cRx]]

http://i10.photobucket.com/albums/a121/j-specaccord/DSC00318.jpg

lol that focker has my rims :eek:

swap lookin good:thumbsup:

[jooboo]

just curious how much do these sedans weigh??

[j-specAccord]

im not much of a civic dude, i think around 1100kgs
my accord is 1390kgs ive stripped a hell of alot so im guessing it would be in the low 1300kgs - high 1200kgs

[ALLMTR]

Man that is a lot of weight for an all motor car....

[JDM_type_R]

from wat ive read about the EG civic sedan (Si).. they weigh about 1050kgs with full interior and spare wheel etc

[j-specAccord]

yeah its alot of weight and you do notice it from rolling start as it doesnt pull as hard as the other allmotors but off the line there is no difference.. plus its more fun beating someone in a car that looks un-competible

[Chris_F]

i thought the cd5's were a bit lgihter than 1390? - man i need some tips to get my car down that light...

[dc4t]

yeah its alot of weight and you do notice it from rolling start as it doesnt pull as hard as the other allmotors but off the line there is no difference.. plus its more fun beating someone in a car that looks un-competible

thats bcoz u know how to launch neccaaa (leon bahah)... i thought a lighter car would be more of an advantage off the line bcoz its easier to get the whole momentum of the car movin forward and off the ground etc.. althoo u also hav less of a traction issue bcoz ur power to weight is less than those civics.. .??

[dc4t]

id also like to say.. vincents car is the bomb!!! any n/a honda that can beat a wrx with a turbo that BIG! has my love

[j-specAccord]

YEAH! go B20 go!

vincent you sweet little asian, you da man!

[riceball]

YEAH! go B20 go!

vincent you sweet little asian, you da man!

damn you, you BIG perverted man. go feed on your own meat!
yeah go EKB20! you bastard. You were meant to represent POV crew!!!

Sang

[ATSEK4]

damn you, you BIG perverted man. go feed on your own meat!
yeah go EKB20! you bastard. You were meant to represent POV crew!!!

Sang


I am in POV man.. coz i am POV. We need some POV stickers.

[JDM_type_R]

yea bro stickers.... im so pov i cant even afford the damn number plate!

[JDM_type_R]

come to think of it i don't think i can afford the stickers either *sigh* LOL ...im being serious too...sigh....

[Jase EK]

you guys need stickers... let me know .. Sang n duy got my msn y0
loving the Quick hondas around Brisbane..

[JDMTMY]

haha we making POV stickers now?? lol
sweet!!

ay vincent..get rid of ur ekb20 plates and come join POV!
Jas....we make stickers and u make and give to u for free???

[Jase EK]

hahaha... i like the way you think jdmtmy ! =P

[JDMTMY]

haha my bad..i ment we design stickers..u make them and give to us for free!! lol

[JDM_type_R]

yea i like the sounds of that.. FREE!!! havent heard that word for a while

[Jase EK]

lol.. dont you guys hear the sayin.. 'nothin is ever free' =P jks ahha.. i got a mate that can make stickers.. did you see the team-ignition one ?
oh custom stickers arent cheap cheap too.. unless is simple.. one colour and small..

[riceball]

lol yeah, i'm trying to get my hand on some free ones, if that doesnt work out then its time to get some pricy ones made. ill give you a holla Jase EK if anything happens.

[bennjamin]

topic covered long ago...now spammign about free stickers ? Keep it to the spam thread plz.

Pm me if u want to properly update this with proper info about a "animal EG"..

closed