PDA

View Full Version : installing light bulbs in headlights.



AZ51LK
18-03-2006, 09:51 AM
i've tried searching for it but found squat... i have a coupe - EJ8 and want to replace the bulbs in the head lights.

? thanks

mrwillz
18-03-2006, 09:52 AM
shudnt it b str8 forward?
http://www.ozhonda.com/forum/showthread.php?t=22618&highlight=HID

mayb that will b help to u

|N|
18-03-2006, 10:21 AM
should take u no longer then 5min.
1. pull the plug off
2. remove the circle rubber thingy
3. unclip the metal clip to slide the old bulb out.
4. replace with new bulb.
and put everyhitng back in ..
all done.

AZ51LK
18-03-2006, 11:33 AM
cool! i did it! thanks guys! took me 1 hour but i did it! i MUST be the man. hmmm i'm gona start my own business now. installing bulbs for your headlights. i'll charge by the hour.

nice avatar, |N|. astro-kitty

mrwillz
18-03-2006, 12:06 PM
note: do not touch the bulb glass wotsoever
theyll blow quiker

aaronng
18-03-2006, 02:02 PM
Wipe down the bulb with facial tissue. Any oil on the bulb will cause the glass to crack. I handle the bulb with the tissue, and never directly touch the bulb. If you touched it, go take it out, wipe the oil off and put it back. :)

|N|
18-03-2006, 03:24 PM
Wipe down the bulb with facial tissue. Any oil on the bulb will cause the glass to crack. I handle the bulb with the tissue, and never directly touch the bulb. If you touched it, go take it out, wipe the oil off and put it back. :)

*nods nods*

EG5[KRT]
18-03-2006, 07:16 PM
u have to use pure alcohol(not beer etc) to get rid of the marks

a tissue wont get all the oil off.. will get majority but not all.

[ricer]
18-03-2006, 07:19 PM
just dont touch the bulb
ur one is a h4 right?
u got plenty of room to hold it without touching the glass

EK9
18-03-2006, 07:33 PM
seriously, i'm pretty sure it's in your car manual...

anyway, done. closed.