PDA

View Full Version : 1/4 Mile ET for CRX (or ED? Civic)



szmidi
18-03-2006, 01:09 PM
Just curious to what times people are pulling and what mods they have done. Just looking at sizing up cost vs effect and the best setup/combination for modifications on a CRX (or similar model Civic). Want to know the range of ETs from stock to full conversion + turbo.

Slider
19-03-2006, 09:27 AM
my ED crx was doing 16.7's (cabable of 16.5's, but had clutch slip) with pod filter and exhaust mods. everything else was standard. weight at the time was 944kg (without driver) and it was making 74kw at the fronts.

iamhappy46
19-03-2006, 12:11 PM
15.53 ¼ Mile
ED Civic with D15B VTEC motor with exhaust(no extractors), intake and 17's with my 48Kg girlfriend driving, rear seat, spare tyre & sub box removed. Weighs approx 840Kg including driver.

rexi3
19-03-2006, 01:25 PM
15.5 STOCK B16a Sir CRX.. nothing done to it at all..

SINISTR
19-03-2006, 04:20 PM
im currently getting 15.8 in my Si CRX - with 17s and street trim. have intake extractors and exhaust. On 15s i'd expect something in the mid 15s. Once I get the ECU and cams/cam gears in I'd be 'hoping' to get into high 14s.

atm getting about 102HP@wheels on the Xspeed Dyno (perth) - which read a little low compared to other dynos around australia.