xfore full exhaust

[Jezzah]

hey folks,
just wanna know if anyone here has the complete xforce exhuast system.
i just wana know how loud the car sounds, with and without the silencer.

cheers

jez

[asiansquad]

it's pretty loud even with the silencer

[QuintessentiaLs]

Yeah I'm thinking of getting one soon as well. Good to have some feed back. Anyone know if it's possible to get Spoon full exhaust???

[MaxiJazz]

Yes Spoon exhausts are available, but at a price....a lot more compared with the XForce set up. Though weighing in a little more than a couple of kg less (i.e. Spoon), i hardly think the Spoon set up is worth the money and time unless you're gna be taking your ride down to the track.

Go XForce I say!!!

[papaya]

It's loud with the bpipe... N1 type is loud.. if you want quiet and sporty .. go with Fuji..

[ahcash]

If you got money.. go with Spoon or HKS Silent series.. If not, Xforce..

[QuintessentiaLs]

How much we talking about???

[Zimp13]

it's pretty loud even with the silencer

i dun think so..... with silencer its pretty quiet.... on my car its louder cos i git the e68.... those things make the exhaust louder....

[Zimp13]

Yeah I'm thinking of getting one soon as well. Good to have some feed back. Anyone know if it's possible to get Spoon full exhaust???

Spoon??? heheh.... u b looking almost double the price than xforce and without the high flow cat downpipe...

[Zimp13]

if wan quiet, can choose xforce street muffler instead of the cannon one.... quieter... most cannon mufflers are loud not just xforce

[magii]

yea its pretty quite with silencer on, however even with the silencer off the noise level is still bearable. But as zimp said it depends what you have on your car, the more mods the noisier it is :D

[Jezzah]

because im getting my xforce system done next week by toda.
that is: header, downpipe, CAT, bpipe and muffler with silencer.
i just dont wana disturb(in other words) piss off the missus.
so xforce systems are loud? what about removing some parts?

jez

[ahcash]

Jezzah.. my advice would be.. put the silencer in at all time.. :D

[edy_l]

can't wait until my jazz fitted with xforce :) is the street muffler quiet i mean compare to the stock

[muli]

would the quieter muffler have slight affect on performance or would it not be noticable?

[magii]

would the quieter muffler have slight affect on performance or would it not be noticable?
pretty sure the muffler has nothing to do with peformance, its only got to do with the sound

[muli]

i was thinking that reduced noise reduce air-flow

[Felix]

I have full XFORCE exhaust on my DC2. header / high flow cat / and twin loop. Its fairly loud when vtecing. I have no resonator.

[[ricer]]

the xforce N1 style ARE LOUD AS! even with the silencer i cant stand it

what ever you do leave your resonator on or else your car will sound shit... will make a buzzing sound over 4000rpm

[Zimp13]

']the xforce N1 style ARE LOUD AS! even with the silencer i cant stand it

what ever you do leave your resonator on or else your car will sound shit... will make a buzzing sound over 4000rpm\

yeah?? wat car is that on?????? bolt on???

[[ricer]]

on a civic
was all custom with the muffler at the end
i took it get taken off and the guy was like its new why?
im like its too loud
he reckons it was normal... i think im too old for these things now haha

[Zimp13]

']on a civic
was all custom with the muffler at the end
i took it get taken off and the guy was like its new why?
im like its too loud
he reckons it was normal... i think im too old for these things now haha


heheh... i c
y dun u put on the silencer? it should quiet down the muffler substantially....

[yourfather]

I find my X-Force silencer is great at making it quiet. It's very loud when its not in, but when it's in, I can have the radio quite low, and have a conversation with the girlfriend fine.

[EGB18CT]

im doing mine soon on the eg when i drop the b18 in, going to do it myself custom job with full exhaust from headder back in 2.5in stainless, 2.5in xforce cat, straight pipe to muffler with no resenator. The muffler is the lk n1 style series with no resenator, will se how she goes if its too loud you can always put the resenator in later, im guessing it will be loud!

[[ricer]]

i had the silencer on always
only had it off for like 10mins of driving and it was way tooo much noise
i like street style mufflers now
my mum has a dtm one on her car
so nice and quiet
just deep on start up

[[ricer]]

im doing mine soon on the eg when i drop the b18 in, going to do it myself custom job with full exhaust from headder back in 2.5in stainless, 2.5in xforce cat, straight pipe to muffler with no resenator. The muffler is the lk n1 style series with no resenator, will se how she goes if its too loud you can always put the resenator in later, im guessing it will be loud!

dude put a reso in
without it ur cars gonna sound like an old shit box
and why stainless? i guess its good if u never drive ur car coz it wont rust out..

[EGB18CT]

it will be mandrel bent and the car will be turboed later on in its life, the car will see the strip often later as well so less restriction in the exhaust the better, then later when i achieve a decent power figure it will be upgraded to a 3in mandrel. Mild steel is only good if ya want sound plus its heavier and a cheap ass way of doing things. If your car is rice then go the mild way press bent....

[muli]

so that x-force catback doesnt come with resonator?

[MR Spyder]

Here's Fujitsubo's Power Getter catback exhaust, in comparison with the stock exhaust;

Stock B-Pipe vs Fujitsubo B-pipe:
http://img130.imageshack.us/img130/2325/18040615302az.th.jpg (http://img130.imageshack.us/my.php?image=18040615302az.jpg)

Stock muffler vs Fujitsubo's muffler:
http://img130.imageshack.us/img130/6131/18040615314fj.th.jpg (http://img130.imageshack.us/my.php?image=18040615314fj.jpg)

Just my contribution.
:wink:

[spoon fit]

how come look different to ronald one?

[kongfu]

XFORCE exhaust sux.better get jdm brands.

[muli]

JDM no better than full custom, JDM wank factor all the way

[Jacky Wong]

Only for Jazz/Fit ride owner....

Power and safe Petrol .... 17"rims able to run 580 kms with full tank. (highway) Avergae speed at 110-120km/h
If you are using 15"rims....I bet you may go more than 600km/h
Thats for sure guys....
you may check it out with moo moo too....
more and more Malaysian member`s are using it...

New header/extractor for sale

http://img217.imageshack.us/img217/7501/picture0622ov.jpg
http://img154.imageshack.us/img154/8896/picture0639gp.jpg
http://img217.imageshack.us/img217/2598/picture0640xr.jpg
http://img210.imageshack.us/img210/6875/picture0655dd.jpg
http://img236.imageshack.us/img236/1844/picture0661ta.jpg
http://img146.imageshack.us/img146/8373/picture0671hy.jpg
http://img146.imageshack.us/img146/6174/picture0684iq.jpg
http://img233.imageshack.us/img233/2098/picture0690np.jpg

As you can see from the pics, it is made of stainless steel and will have to replace the original header/extractor and catalytic converter. The header/extractor's piping is larger than the original one. So with larger piping and straight flow without the catalytic converter, performance will be better for sure.

RM450 for stainless steel material
RM350 for aluminised steel material

[free2d]

What brand is it?

[FIT]

can anyone post what will the complete setup (Header+catback) sounds like? with and without the silencer? or even the street exhaust?

[kimo]

Made by whom


Only for Jazz/Fit ride owner....

Power and safe Petrol .... 17"rims able to run 580 kms with full tank. (highway) Avergae speed at 110-120km/h
If you are using 15"rims....I bet you may go more than 600km/h
Thats for sure guys....
you may check it out with moo moo too....
more and more Malaysian member`s are using it...

New header/extractor for sale

http://img217.imageshack.us/img217/7501/picture0622ov.jpg
http://img154.imageshack.us/img154/8896/picture0639gp.jpg
http://img217.imageshack.us/img217/2598/picture0640xr.jpg
http://img210.imageshack.us/img210/6875/picture0655dd.jpg
http://img236.imageshack.us/img236/1844/picture0661ta.jpg
http://img146.imageshack.us/img146/8373/picture0671hy.jpg
http://img146.imageshack.us/img146/6174/picture0684iq.jpg
http://img233.imageshack.us/img233/2098/picture0690np.jpg

As you can see from the pics, it is made of stainless steel and will have to replace the original header/extractor and catalytic converter. The header/extractor's piping is larger than the original one. So with larger piping and straight flow without the catalytic converter, performance will be better for sure.

RM450 for stainless steel material
RM350 for aluminised steel material

[EGB18CT]

my exhaust is in! full custom made using stainless and xforce cannon and hiflo cat. Very very nice sound very deep but sharp clear purr. it is loud cos i dont have a resenator in it maybe later on and best bit is ive put minimal bends in it so whoever said they will sound shit is wrong and quality is low...pfft. anyway they are good quality exhaust although i cant comment on the piping as i had purchased it seperately form a stainless supplier and will last a lifetime. if you are looking at a performance exhaust and dont want it there just for sound do it properly and get a stainless MANDREL bent one, otherwise go the mild steel press bent for all other applications. dont get in ur head just cos its JDM it is good and everything else is up sh*t creek. do some research, inspect the product look at welds and certain bend and suff before you buy so u wont regret anything later on...

[FIT]

http://www.youtube.com/watch?v=VXI61PgnA-8&search=honda%20jazz