PDA

View Full Version : air/fuel ratio wiring.



BIG`O
29-03-2006, 04:00 PM
searching found me nothing.
alright.
been given an A/F gauge. wired it all up to power and earth (used headunit wiring (RED->RED & BLACK->BLACK) now the remaining purple wire i have run through the firewall, and before snipping or tapping into any wires, i want to confirm which colour wire it is, and the easiest place to tap into it.
any info on this is good.
thanks heaps
Shane O

ps. i know its not gonna do much on the stock air sensor, but whats involved in changing it to a better sensor??

jsttgn
29-03-2006, 05:06 PM
i think www.team-integra.net has an article on it

BIG`O
29-03-2006, 05:09 PM
i saw that - hard to understand, will re read it now.

LVNIT
29-03-2006, 05:19 PM
If you want to change to a better sensor your going to have to buy a wideband unit and a 0-5volt sensor, then use the outputs on the wideband unit and send them to the ECUs o2 inputs.

Look at paying $500, thats the cheapest one I could find when I bought mine.

BeeH
29-03-2006, 07:20 PM
its the Green wire on the 02 snesor mate....correct me if im rong peoples

BIG`O
29-03-2006, 07:29 PM
If you want to change to a better sensor your going to have to buy a wideband unit and a 0-5volt sensor, then use the outputs on the wideband unit and send them to the ECUs o2 inputs.

Look at paying $500, thats the cheapest one I could find when I bought mine.

:o not gonna spend that much on a stocko b18b ;)

LVNIT
29-03-2006, 08:04 PM
Yeah not much point unless you are changing the computer values etc ;)

ProECU
29-03-2006, 08:13 PM
Like i told you in PM

wire it up to the TPS... feedback is useless anyway.

BIG`O
29-03-2006, 08:31 PM
Like i told you in PM

wire it up to the TPS... feedback is useless anyway.

i'm yet to understand. what is "TPS"? throttle position sensor? where is this located? what colour is the wire etc. im new to the whole electrical side (other then stereo) so help a honda enthusiast out...

iceman91
30-03-2006, 11:10 AM
why would you wanna connect the a/f ratio meter to the tps??..it is good to just connect it to the 02 sensor on the exhaust..

ProECU
30-03-2006, 11:45 AM
My point is, you can wire it up to abny sensor, pick at random, toss a coin, it wont matter because the feedback you'll get from a stock O2 sensor in terms of wideband input to a Wideband Gauge is absolutely useless.

iceman91
30-03-2006, 12:32 PM
kool, my bad...well he is talking about a regular a/f ratio not wideband...and as you said for a wideband he will need to change his sensor too...which is 150us$ by dynojet..

LVNIT
30-03-2006, 01:33 PM
Sensor will not cost US$150, I paid AU$70 for my bosch unit.

iceman91
30-03-2006, 02:40 PM
for a wide band 5 volt sensor??? that is an excellent price..i knew 150$ because thats what i was quoted for an extra sensor with the wideband kit i bought from dynojet...well good to hear its 70$aud...

BIG`O
30-03-2006, 03:40 PM
so tap into the green wire or what?