Market Research Required 4 Australia K Honda owners. Hondata

[BLKCRX]

Hey all I’m trying to do some market research in terms to get ready for the release of the New Hondata ECU for K engines in Australia. I need to do a large study of Australia Honda ECU’s throughout Australia as we have conflicting data and evidence, from different states, and this is part of the reason why were stalling the release of the ECU out here in Australia.

I encourage everyone with any K engine, or new Honda to help me clarify some important information, as I’m interested in Sampling ECU’s from all over Australia, so if you have 10 minutes free please help.

Removal of your ECU from the passenger kick panel

Please read this website if your unsure on how to remove your ECU.

http://www.hondata.com/k20removeecu.html

You will require the following tools

Philips screwdriver
10 mm socket and drive

What I need off your ECU, is two key factors,

One.
Identification of the Oki processor, labelled (1) in the attached picture.
The identification marks are very hard to read, and you might need to shine a bright light onto the surface mount processor to read the required information.

It should read along the lines of, please try and read the numbers as accurate as you can.

Oki Japan
505
L66592 – 1252216 G2

The 2nd item requires is the PRB number as listed on the white sticker on the ECU plugs

Example
37820 PRB Q01
2069 100252 3H3O

http://blkcrx.hondata.com.au/blkcrx/aust-dc5/ecu.jpg


Finally ill need the following information

Type of car
Year the car was made
Estimated purchase date.

For those that can help me conduct this market Research, thankyou very much, your time and commitment means a lot to me.

Please email me this information to james@hondata.com.au

Regards James