Chopped springs

[89lude]

hey all i just want to know if there is anyway of know if the springs have been chopped thanks.

[BlitZ]

look at the cut.. and is the springs really small...and the end unbounded? it should tapper off flat for the cup

if u look at my chopped springs u cant tell i filed my cut down and sprayed it..

[DomenEK]

if u look at my chopped springs u cant tell i filed my cut down and sprayed it..
Chopped springs are bad, mmmmmkay!




As BlitZ said, look at the springs themselves, they should taper off flat on the ends. It should be pretty obvious if they have been cut, in which case you'll have to go out and get new ones, because the strucural integrity of the springs will have been altered by the cutting, making them unsafe.

[BlitZ]

Chopped springs are bad, mmmmmkay!



kakakakaak yeah are generally bad....

but im more than happy with my set up. ;)
i do advise against it..

i cut a dead progressive coil off my OEM springs.. it will low the car by 1 cm..
considering its a dead coil, i dont think it really matter.

even now.. my sprigns sit so flat that they would still sit up..


but yeah dont do it

[89lude]

yeah i know chopped springs are bad but im buying second hand springs that are low so i thought ill just check first if they are chopped h
hey blitz do you have pic i can look at

[BlitZ]

yeah i know chopped springs are bad but im buying second hand springs that are low so i thought ill just check first if they are chopped h
hey blitz do you have pic i can look at

I havent got a pic.. but the end is suppose to be nicely rounded..

one end should almost sit up... they normally cut this end as the other end has to fit the lower perch..

it the springs can almost sit one on one side ti should be uncut..

and besides when people cut it they dont normammly paint it..