oil n water lines

[Mr. Focus]

hey kids,

im sourcing the last of the parts for my boosting build up on my d16a8. the last of the collection are oil n water lines plus the connectors. where would i source these from and what sizes etc. would i be looking for?

the turbo i'll be running is a t28 from a sil-80

[Slow96GSR]

Try Russell (From Edelbrock) lines and connectors. They also make line kits for turbo, fuel, brakes, pretty much anything that needs a hose that can be upgraded. And the prices aren't outrageous

[saxman]

tunertoys.com carries them all, in nicely set up packages

[ProECU]

locally, just go to any old school V8 speed shop, and ask for braided line & earls fittings and make them up yourself..... easy 30minute job.

[Mr. Focus]

hmmm...thats what i was thinking, but i really have no idea of what im after

[ProECU]

hmmm...thats what i was thinking, but i really have no idea of what im after

any good speed shop will be able to point you in the right direction.
Some will even make up hoses + fittings to the desired lengths you need, inhouse.

Just go have a chat to them

[Mr. Focus]

hmmm...cheers guys :D

[Weq]

pirteck and any hydrolic hose fittings shop! we use metric here, so its alot easier to source then AN gear.

[ErazeR]

Enzed and Pirtak
100 bucks a line and u need 3

[saxman]

Enzed and Pirtak
100 bucks a line and u need 3
3? at $100 each?


for the oil lines, you'll need one braided line... for oil supply... but it shouldn't be anywhere near that cost.

For oil supply and the water lines, you certainly don't need anything fancy like that at all.

[STOCK]

Call up the pirtek van to come out to you and they will make up lines to suit on the spot.