PDA

View Full Version : [Euro] Camber Kit (NOW CLOSED AS Qs COVERED BEFORE)



Ferrarista
14-04-2006, 12:50 PM
Hey guys,

Anyone here put a camber kit on their Euro?

I recently took my car to get a wheel alignment and we just couldnt get it right only to discover that my rear wheel camber was off. On the left hand side it was -3.5% and on the right hand side it was -4.5% meaning the car was veering to the left.

If you have done it what are your recomendations? How much should i look at paying for it? The car has been lowered 2.5' at the front and 2' at the rear on 18x7.5 wheels.

Thanks in advance.

Chris_F
14-04-2006, 01:05 PM
I have a rear camber kit. Any drop on the euro lower then 1.5" will always put the camber a bit out of spec.

Fulcrum has a kit available for a few hundred installed - however it's not as easily adjusted as the more expensive options from ingalls / spc frmo the states. If you just want to get your camber into spec and aren't too wrorried about the adjustability I'd probably reccomend just getting the Fulcrum one - I did and it's working fine :thumbsup:

yfin
14-04-2006, 01:11 PM
The answer to these questions are found by doing a simple search "Euro camber".

Let me know if you can't find the answer and this 6 year old will help!

If you have more questions not covered in the search just add it to one of the many camber threads.

http://www.webnical.net/search-engine-optimisation/images/search-engine-users.gif