PDA

View Full Version : Civic 96 Immobilizer



CVK-A
16-04-2006, 12:10 PM
Guys attached below is a picture of wat seems to be an immobilizer and two relays.....

has anyone seen this b4 in a civic ? is it standard ? or an adon

the reason im asking is cause mainly i wnt a controller activated central locking
and i wna no wat i need....wether i can jst somehow get a button for the existing one...or im gna have to get a whole new system with another new imob...and button
any gossip ? :)

http://au.geocities.com/damakos/Imob.jpg

ECU-MAN
16-04-2006, 04:47 PM
thoes relays could be for the aftermarket immo, but defainantly not factory

you have to investigate if your control unit has central locking output pulses

CVK-A
16-04-2006, 11:50 PM
central locking output pulses ? u mean is it working ? hrmmmmm yeh that i do

ECU-MAN
17-04-2006, 12:02 PM
that black box in the pic above is your remote immobiliser/alarm control unit right ???

if so then it should have two wires that wil paulse either to ground or positive when the unit is activated or disactivated

you connect these wires to your central locking relay to activate the central locking