Sexc86
29-04-2006, 08:38 PM
hey guys i have 2 sets of rods for my d16y4
First set are eagles, with the logo imprinted on the top (shown in picture)
2nd set i am not sure but they have a marking on the top that say "MSA / MSP" Does anyone know what this means or who manufactures them?
Which would be the best to use for my high power turbo setup?
I have a the rod Spec. Tag for the 2nd set. The specs are as follows
Part no. - a93845B
Engine Make - Civic 1.6
Rotat wt - 358
recip wt - 135
c to c - 5.394
Big End Dia - 1.89
B.E. Width - .892
Pin End Dia - .7480
w.o - Bv887
Rod Material - Steel
Lube - Oil
Bolt Part No - 90817
Stretch - .004" - .006"
Torque - 25 Ft.LBS
Please guys let me know your thoughts need help !!
http://i65.photobucket.com/albums/h238/El-Draper/Picture115.jpg http://i65.photobucket.com/albums/h238/El-Draper/Picture120.jpg
First set are eagles, with the logo imprinted on the top (shown in picture)
2nd set i am not sure but they have a marking on the top that say "MSA / MSP" Does anyone know what this means or who manufactures them?
Which would be the best to use for my high power turbo setup?
I have a the rod Spec. Tag for the 2nd set. The specs are as follows
Part no. - a93845B
Engine Make - Civic 1.6
Rotat wt - 358
recip wt - 135
c to c - 5.394
Big End Dia - 1.89
B.E. Width - .892
Pin End Dia - .7480
w.o - Bv887
Rod Material - Steel
Lube - Oil
Bolt Part No - 90817
Stretch - .004" - .006"
Torque - 25 Ft.LBS
Please guys let me know your thoughts need help !!
http://i65.photobucket.com/albums/h238/El-Draper/Picture115.jpg http://i65.photobucket.com/albums/h238/El-Draper/Picture120.jpg