Rear swaybar for EF.. options?

[Dxs]

Hey guys just wondering about my options for a rear swaybar on my EF8.

So far i have RSR springs and KYB shox.. front and rear strut braces and c pillar brace and front tie bar.

Now my thoughts are that i should get a rear swaybar because everyone recommends them as a good upgrade.

However i am having difficulty sourcing one that are specifically for EF8.

My other thoughts on my setup includes to leave the front swaybar stock to reduce/prevent understeer. And to also consider a rear tie bar?

The car is a daily driven street car.. but i live in the mountains so i fond of twisty runs


so yeah could someone recommended me a rear sway bar setup for EF and where i could source one. Like brands/modelnames or if swaybars for other cars would fit.

thanks

[Setanta]

You have one already - Whiteline can make up a custom adjustable for you though.

[Dxs]

yeah i know there is the factory one...
i doubt i could be bothered getting custom.
I know whiteline make 18mm ones..
but i am thinking that larger might be the way to go if possible.

I know there are quite a few american swaybars around that are 20 to 22mm
like tanabe usa, ST etc. But shipping is usually too expensive to make it worthwhile.

:/

[ekslut]

yeah, I had the same problem. Only decent sized ones I could find were in the US. So I am trying adapt a DC2 rear swaybar to my ED6 and see how it goes. Need to wait til I get my car back from the mechanics before I can try it and get results.

[SINISTR]

Ive got one of the whiteline swaybars... would have to be 18mm over the stock 14mm? - its great!

[BSRacer]

Won't an ed6 whiteline one fit???? I'm about to buy one and don't really want to find out it won't afterwards

[egSi]

the whiteline one replaces the OEM supplied one.

[Dxs]

bsracer.. it should fit.. but whiteline ED ones are only 18mm
where as others are 22mm

how much u getting it for anyway?

if 20/22mm ones dont seem like an easy option in the future i will just get a whiteline

some people like 'string' have used a typer whiteline kit.. and i have read that DA integras (string's car) and EF's use the same rear sway bar setup..

:/

[n/a]

anything above 18mm would be overkill. well thats what i believe. wouldnt 18mm be suffice?

[Dxs]

these are the two i have found in america which are both 22mm for crx:

http://cgi.ebay.com/ebaymotors/TANABE-REAR-ANTI-SWAY-BAR-HONDA-CIVIC-CRX-EF-88-91_W0QQcmdZViewItemQQcategoryZ33592QQitemZ80559630 40QQrdZ1
http://cgi.ebay.com/ebaymotors/ST-REAR-ANTI-SWAY-BAR-HONDA-88-91-CIVIC-CRX-ALL_W0QQcmdZViewItemQQcategoryZ33582QQitemZ8049541 895QQrdZ1

[Dxs]

Won't an ed6 whiteline one fit???? I'm about to buy one and don't really want to find out it won't afterwards

end up getting it?
price and pics?

[Disco-d]

Qucik question while this thread is up.

civic sways and CRX sways??? are they different?
and if i put a crx sway on my ED civic would it be better handling?

Sorry to hijake the thread.

[ONE600]

18mm is plenty for road tyres and road use, you wouldnt want any larger unless ur full circuit and running at least semi-slicks