Subwoofer box board..

[bajajracing]

need info please..
im going to make subwoofer box for my car.
where can i get a board to make sub box? and what kind of board?
how many mm?
thanks guys...really need info..

[aznsiko]

MDF board... and around about 15mm should do..

[Xaber]

hey, u can get MDF board from bunnings, make sure its at least 12mm thick, usually i make all the sides out of 12mm thick and the face that holds the sub out of 18mm thick MDF.

P.S-make sure u wear a protective mask when cutting as the dust is quite bad for you.

[EuroDude]

Use "MDF" wood as it is solid and wont bend or anything, which you should be able to buy at a decent hardware store. Dont breath the dust when cutting it.

Thickness should be around 3/4 of an inch, or around 16mm-18mm.


[edit] Deja Vu lol

[Slow96GSR]

You can also use particle board, not fiber board. The P.B. is half the cost of MDF and just as good for a daily driver.

[integraz]

Use MDF, way stronger than most other particle boards, and fibred boards.

16 or 18mm will do, with bracing, or u could laminate two boards into 32-36mm for the baffle to make it super strong, even thouhg it might be overkill, but always good to reduce flex.

[bajajracing]

okie dokie... thanks all.