Log in

View Full Version : sway bar sizes


jooboo
22-05-2006, 09:08 AM
hey was just wandering what sway sizes you guys have for dc2r's...and i believe 24mm front n 22mm rear is standard? correct me if im wrong
Q_ball
22-05-2006, 09:11 AM
Correct :)
|N|
22-05-2006, 09:25 AM
oh.. i alreayd thought its 24mm stock for dc2r.. sik
VTi_b0i
22-05-2006, 09:49 AM
a lil off topic but would a 21-23mm swaybar on the rear of a EG sedan be good? not too big?
T-onedc2
22-05-2006, 09:56 AM
AUDM ITR has 24mm front & 22mm rear, JDM ITR 98 spec has 25mm front & 23mm rear. Over the last couple of nights after work I've replaced the stock rear (VTiR 14mm) with JDM 23mm including reinforcement kit, and turned out the front was already 24mm but swapped it with the 24mm I just bought anyway.
barefootbonzai
22-05-2006, 11:51 AM
a lil off topic but would a 21-23mm swaybar on the rear of a EG sedan be good? not too big?

Should be fine, but you'll need some sort of reinforcement in order to fit it.
VTi_b0i
22-05-2006, 11:58 AM
re-inforcement? lol like what?
czy_sol87
22-05-2006, 04:00 PM
anyone know whats the stock front and rear sway bars on a delsol???
Honda_CRX
11-09-2007, 04:57 PM
anyone know whats the stock front and rear sway bars on a delsol???

Good question, would like to know also.

And what would be good to change to ie 24mm ?? - rear
adnoh
11-09-2007, 06:22 PM
AUDM ITR has 24mm front & 22mm rear, JDM ITR has 25mm front & 23mm rear. Over the last couple of nights after work I've replaced the stock rear (VTiR 14mm) with JDM 23mm including reinforcement kit, and turned out the front was already 24mm but swapped it with the 24mm I just bought anyway.

Which year of the JDM ITR r u talking about ? 96 or 98 Spec ?

JDM ITR 96 Spec and JDM ITR 98 Spec had the same size of sway bar ?

thanks :)
T-onedc2
11-09-2007, 07:34 PM
Sorry I didn't make it clear,
JDM 96 = 24mm (f) 22mm (r)
JDM 98 = 25mm (f) 23mm (r)
Mr_will
11-09-2007, 08:21 PM
i have a 22mm bar on my da9
Spunkymonkey
11-09-2007, 08:54 PM
try and search mate....

another thread on this same page in this part of the forum which covers the same thing:

http://www.ozhonda.com/forum/showthread.php?t=73530
Spunkymonkey
11-09-2007, 08:55 PM
re-inforcement? lol like what?

beaks kit....asr brace etc, or diy
fatboyz39
13-09-2007, 06:32 PM
Just fit heavier rear springs.