eg/dc2 coilover query

[BIG`O]

searched for a bit and didn't find anything, might move it to the n00b section as its a pretty dumb question.

will coilovers off an eg fit a dc4? and what would i need in order to fit them as far as lca's etc etc.

[barefootbonzai]

generally there is only coilovers made for the eg6 or eg9 which in turn is the same as ITR. In order to fit these on DC4 you'll just need the rear lower control arms.

[BIG`O]

generally there is only coilovers made for the eg6 or eg9 which in turn is the same as ITR. In order to fit these on DC4 you'll just need the rear lower control arms.

sweet as man thanks.

anyone got feedback on the tein ss?

[bungsai]

ridden in an accord with ss, very soft, felt stock, yet great handling, if you want to ride LOW, in COMFORT and good HANDLING it is good.

I have GAB height damper adjustables, very stiff, meant for the track, but riding low. Mine are from an eg, non eg6, so didnt have to change lca's or anything, but rare and v hard to find.

[BIG`O]

ridden in an accord with ss, very soft, felt stock, yet great handling, if you want to ride LOW, in COMFORT and good HANDLING it is good.

I have GAB height damper adjustables, very stiff, meant for the track, but riding low. Mine are from an eg, non eg6, so didnt have to change lca's or anything, but rare and v hard to find.

true that.
well it will be 80% street 20% track.
and dumped of course..;)

[bungsai]

meh get ss, and just ramp up the damper when u wanna hit the track. Should be sweet for ya!