PDA

View Full Version : Thought you guys would be interested...



dsp26
23-05-2006, 09:44 PM
http://www.gccorp.com.au/automotive/product_info.php?products_id=152

AusS2000
24-05-2006, 09:07 AM
Beautiful, but at $2K, tell'em he's dreamin'.

It's been said that there are gains to be made in FI with a better intake manifold, but that one doesn't look like it has that much volume.

EfiOz
24-05-2006, 11:17 AM
He went to all that trouble and didn't bother making it a multi throttle?!?

Nice workmanship though.

AusS2000
24-05-2006, 11:21 AM
There's a whole lot more to multithrottle than just 4 butterflys. Like, where do you get the MAP signal?

EfiOz
24-05-2006, 06:47 PM
Air distributor manifold under the TB's is how we normally do it, but we only bother with that if we're turbocharging. Otherwise, we spend the money on a really good rotary pot for the TPS.

Handy for running the IAC as well.

dsp26
24-05-2006, 07:39 PM
i'd assume this is for a very modified engine that has an accurately tuned fuel/ignition on dyno without afm/map signals.

AusS2000
25-05-2006, 10:31 AM
I expect this product originated on the Hypertune turbo S2000. To be frank there won't be much improvement on an NA S2000, even with ITBs. But gains have been seen with FI and larger plenums on the intake manifold. Been meaning to do something myself for a while. Even have a spare IM to hack up.

EfiOz
25-05-2006, 05:29 PM
To be frank there won't be much improvement on an NA S2000, even with ITBs. But gains have been seen with FI and larger plenums on the intake manifold. Been meaning to do something myself for a while. Even have a spare IM to hack up.

There's gains to be had......
http://www.compsystems.com.au/images/Jenvey/pgCKH05.gif
http://www.compsystems.com.au/images/Jenvey/19-05-06_1525.jpg
http://www.compsystems.com.au/images/Jenvey/19-05-06_1526.jpg
http://www.compsystems.com.au/images/Jenvey/19-05-06_1527.jpg

AusS2000
25-05-2006, 06:16 PM
That's not bad. But what does a complete Jenvey ITB set up cost?

Also, is that running with open stacks? That is not good for a street car.

EfiOz
25-05-2006, 06:26 PM
That's the not so good bit of it. It's about $2750 plus the ECU ($1950).

That was with standard cams. We're trying some Jun things next in a customers car and then a set of CAT cams on the development engine.

No, it has an airbox (C/fibre) with a big outlet that goes into a Green Cotton cold air box.

jamesemucc
01-09-2009, 07:08 AM
That's the not so good bit of it. It's about $2750 plus the ECU ($1950).

That was with standard cams. We're trying some Jun things next in a customers car and then a set of CAT cams on the development engine.

No, it has an airbox (C/fibre) with a big outlet that goes into a Green Cotton cold air box.

What ECU would you be suggesting? and what mods are required to enable it's use?