exhaust size?

[[[d a n n y]]]

what's the best exhaust size for a b16a?

the 1 that'll give me maximum power available just through exhaust and filter?"

[[G]]

2.25 inch - mandrel bent

[wynode]

With a good set of 4-1 headers.

[online]

nice

[Setanta]

]2.25 inch - mandrel bent

As above and also what Wynode said - but don't buy cheap 4-1 header aka hurricane and its ilk - I remember Chuck telling me he got no improvement over the stock manifold with cheapies.

Quick note: "headers" implies 2 or more - usually seen on a V4, V6, V8 etc. B-series Hondas run a "header" - singular not plural ;)

[one more chance]

4-1 you will lose a fair bit of low end power, but will pick up more through the top end.
4-2-1 is a nice in between design that gives u alot more of a even flow.

[SiR]

what's mandrel bent?

[Jnr Teggy]

mandrel bent = uniform pipe diameter for a bend

i.e: instead of the pipe being bent and crushed into place it is streched so that it does not loose shape internally

[[[d a n n y]]]

2.25 " that's the way i'll go

[vti-2]

That's the ideal size, with 2.5" you loose too much power down low...

[SiR]

mandrel bent = uniform pipe diameter for a bend

i.e: instead of the pipe being bent and crushed into place it is streched so that it does not loose shape internally

Cool, thanks :)

[[[d a n n y]]]

hm..ok thanks guyz for all ur info

and 1 more things will the EG hatch springs fit in the EG sedan?

[vti-2]

and 1 more things will the EG hatch springs fit in the EG sedan?

AFAIK yes... :roll: