CTR/ITR pistons into b18b block

[BlitZ]

its all quiet confusing ....

what kinda compression and possibilities ...


LS-VTEC (PR3head)
I have read that CTR pistons, LS crank, new rod bolts. would net a compression of about 12.3 ? is this correct?

what kinda compression would i get with ITR pistons? and what about std LS pistons..


and what is required to get CTR pistons onto a LS rod and crank? somehitn about shaving .5mm of the rod?


thanks

[ekslut]

for the what compression you will end up with check out:

http://www.c-speedracing.com/howto/compcalc/compcalc.php

Using that it does seem that you will get 12.3:1cr with CTR pistons

ITR pistons should get you about 11.6:1cr, & LS pistons should be 9.7:1cr

[BlitZ]

for the what compression you will end up with check out:

http://www.c-speedracing.com/howto/compcalc/compcalc.php

Using that it does seem that you will get 12.3:1cr with CTR pistons

ITR pistons should get you about 11.6:1cr, & LS pistons should be 9.7:1cr

thanks mate..
thats awesome