[accord 95] installing CAI

[mrwillz]

ok atm been trying to install a CAI for the accord..
ran into some troubles..

thers like a 'airflow solenoid' or sumthing along the lines attached to the bottom of the stock intake..
http://www.ozaccord.com/forums/showthread.php?t=291
this is wot im exactly talking about..

now haf ne of you guys experienced/done a CAI install for the accord..
theres quite a few hoses coming off this black box and a sensor also...

ne help will b appreciated..
thx!

[bOoStn]

What exactly are you having trouble with? Any vacuum hoses you can just jam a bolt in them, and it will block them, or you could get a few t-pieces, and connect them all together.
What sensor are you talking about?

[mrwillz]

i want to remove the actual unit...
because the CAI is big and only way to fit the CAI is to remove this black box unit..
well the thing is theres like a hose that goes all the way up to the injectors 2.. and i dun want to b kutting up ne hoses ..
im not sure wot sensor is it but its electrical and plugs into the unit..
i will upload a pic...

[poid]

if you follow the vacuum hose that goes to the solenoid box for the intake, you'll should see where it is teed off near the throttle body, You can disconnect the vac line there and block it up, and then remove the rest of it.

I dont remember a vac line which goes near the injectors, but it may be for the EGR or something.