PDA

View Full Version : JDM B16A Valve clearances


okocimski
28-05-2006, 10:50 AM
Does anybody know if the valve clearances for a JDM B16A are the same as the AUDM B16A2 found in the EK4 or EM1?

Need to get them done, my tappets are noisy as hell.
90xsi
28-05-2006, 11:10 AM
yeap its exactly the same assuming you have stock cams

good luck, :D
okocimski
28-05-2006, 11:22 AM
yeap its exactly the same assuming you have stock cams

good luck, :D

Yep, stockers cams, thanx :)
ECU-MAN
28-05-2006, 06:43 PM
Like 90xsi said

I did tappets today on a DA6. no problems at all.


Valve clearances (cold)Inlet 0.15 - 0.19mm Exhaust 0.17 - 0.21mm
at camshaft