View Full Version : installing tacho for Eg civic
-MuGen PoWer-
03-05-2004, 07:19 PM
hi
my friend gave me his 5 inch tacho with shiftlight.
i was wondering how would you install this in my EG civic.
thanks
MrPlow
03-05-2004, 07:25 PM
yeh mick im wanting the same advice, but i need help on installing a air/fuel ratio gauge in my ek,
even a place where i can get it done will be good?
[[d a n n y]]
03-05-2004, 07:54 PM
yeap there is a plcae in west ryde
where i got mine done in my old car
called proconcept
Mitch M
03-05-2004, 07:57 PM
]]yeap there is a plcae in west ryde
where i got mine done in my old car
called proconcept
ph number :)
-MuGen PoWer-
03-05-2004, 08:09 PM
how much issit danny??
XXpl0Sive
03-05-2004, 08:12 PM
Just do it yourself, it's very easy :)
[[d a n n y]]
03-05-2004, 09:57 PM
i got it installed for 70
sorry mate
dont have the number
incoming
03-05-2004, 10:12 PM
hi
my friend gave me his 5 inch tacho with shiftlight.
i was wondering how would you install this in my EG civic.
thanks
under the bonnet between the master cylinder and vtec solenoid theres the wiring loom and heaps of wires connected by the grey plug..
there should be a baby blue wire thicker then the rest... thats the coil wire thingy to connect to the green wire on the tacho.
red=power
black=ground
white=illum... (connect to headlights)
simple jist of it
incoming
03-05-2004, 10:15 PM
yeh mick im wanting the same advice, but i need help on installing a air/fuel ratio gauge in my ek,
even a place where i can get it done will be good?
i can tell u which to connect the purple (O2 sensor wire) wire when i go to my gf's house tomorrow and post it up...
i connected mine straight of the ecu.. but i been told that it messes with the frequency or some shit.. i also been told thats full of shit...
Spoon-Accord
03-05-2004, 11:00 PM
i give u a hint or advice..
the way i did it was...
go onto apexiuse.com and find the installing manual for the apexi RSM..
u will then find a wiring diagram..
and BOBS UR UNCLE..
apexi site has a .PDF file which u download.. and find ur ECU wiring diagram
easy as piss..
:D
ken
incoming
03-05-2004, 11:25 PM
i give u a hint or advice..
the way i did it was...
go onto apexiuse.com and find the installing manual for the apexi RSM..
u will then find a wiring diagram..
and BOBS UR UNCLE..
apexi site has a .PDF file which u download.. and find ur ECU wiring diagram
easy as piss..
:D
ken
hahah i got the diagram from the apexi turbo timer thats at my gf's..
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.